Sony TC-WE425, TC-WE525, TC-WR681 Inserting a Blank Space During Recording (Record Muting), Dubbing only specific portions

Advanced Recording Operations

zDuring high-speed dubbing

Only pis operative.

zYou don‘t have to adjust the recording level or select the Dolby NR system during dubbing

Dubbing is automatically performed with the same recording level and Dolby NR system as the original in deck A. If, however, you want to monitor the sound during normal-speed dubbing, set DOLBY NR to match the tape in deck A (see page 5).

zYou can adjust the pitch of the playback on deck A (TC-WE525 only)

See page 5.

Note

If a TV set is placed near the tape deck, noise may occur during high-speed dubbing. In that case, turn the television set off or move it away from the tape deck.

Dubbing only specific portions

You can do this only during the normal-speed dubbing.

1Press pon deck A at the portion you want to skip.

Deck B changes to recording pause.

2Locate the point you want to resume recording on deck A, then stop the tape.

3Press PAUSE Pto resume dubbing.

Inserting a Blank Space During Recording (Record Muting)

You can insert a blank space of 4 seconds between each track or erase unwanted portions on a tape.

5

46

37

2 8

19

010

0	)	0	)
p	ª ·	p ª	·
		P R	r
§			§

PAUSE P REC MUTING R ·

1Start recording.

2Press REC MUTING Rwhere you want to insert a blank space.

“REC” flashes in the display and a blank is recorded on the tape.

After 4 seconds, Plights up and the tape deck changes to recording pause.

3Press PAUSE Por ·to resume recording.

zIf you want to insert a blank space longer than 4 seconds

Hold down REC MUTING Ras long as you want. After 4 seconds, “REC” flashes faster.

When you release REC MUTING R, Plights up and the tape deck changes to recording pause.

Press PAUSE Por ·to resume recording.

10