Sony TC-WE425, TC-WE525, TC-WR681 Basic Operations, Basic Operations, Operations Basic

Basic Operations								Basic Operations
Playing a Tape
3 2			4
	RESET	MEMORY	A	COUNTER	B	RESET	MEMORY
								AUTO REC LEVEL
								5
								4	6
								3	7
								2	8
								1	9
DIRECTION MODE							DUBBING A B	0	10
A ￿a RELAY							HIGH/NORMAL
						START(DECK BP)		FADER	ARL
		0	)		0
ØON øOFF							)
		ª	·			ª	·	￿ SYNCHRO
PITCH CONTROL	p				p			PHONES
			DOLBY NR
			OFF B	C		PAUSE REC MUTING REC
– +						P R	r

§§

•See page 4 for hookup information.

•You can use either deck for playback.

zTo locate the beginning of a tape and start playback automatically (Auto Play)

Press 0while holding down ·. For the reverse side, press )while holding down ª.

zTo play a tape recorded with the Dolby NR* system

Set DOLBY NR to the same position that the tape was recorded in—B or C.

zWhat is the Dolby NR system?

The Dolby NR (noise reduction) system eliminates tape hiss noise by boosting low-level signals in the high- frequency range during recording, then lowering them during playback. Type C provides greater noise reduction than type B.

zYou can connect the headphones to PHONES (TC-WE525/WE425 only)

*Dolby noise reduction manufactured under license from Dolby Laboratories Licensing Corporation.

“DOLBY“ and the double-D symbol aare trademarks of Dolby Laboratories Licensing Corporation.

1	Turn on the amplifier and select the tape deck position.
2	Press 1/u(or U), and then press §
	and insert a cassette.
	With the side you want to play
	facing you
3	Set DIRECTION MODE.
	To play back	Set to
	One side only	A
	Both sides continuously*	a
	Both decks in succession*	RELAY

* The deck automatically stops after playing back five times.

4 Press ·.

The deck starts playing. Adjust the volume on the amplifier.

Do not turn off the deck during operation.

To	Press
Stop playing	p
Start playback from the reverse side	ª
Pause (deck B only)	PAUSE P. Press the button again to
	resume play.
Fast-forward or rewind	)or 0
Take out the cassette	§after stopping playing

zTo adjust the pitch (Pitch Control function) (TC-WE525 only)

			OFF
Ø	ON ø			Push in the PITCH CONTROL button to activate Pitch Control
				function and turn the control clockwise to raise the pitch or
PITCH		CONTROL		counter-clockwise to lower it.
				You can adjust the pitch during playback on deck A or normal-
			+	speed dubbing.
	–

Operations Basic

5