TrackSnap Manual | Model |
Camera Attached Setting
Switches 5, 6, and 7 setups which camera is attached to your PixController board. Note: Even though there are 2 different PIC controller chips available for the PixController LE (Original and LE II) your camera is using the Original chip. Both are listed below are the settings for the corresponding controller chip for reference on which other cameras can be used.
Camera (Original LE)
Sony/Canon LANC Camcorder -
Sony
Minolta X20, Sony DSC-UXX (Sony U30)
RSS (D380/D370/35mm always on mode)
RSP (on/off digital camera mode using external supply)
RSP3i (on/off mode, internal supply, D370/D380)
RSP4i (on/off mode, internal supply, D390/D395)
Camera (LE II)
Sony/Canon LANC Camcorder in VTR mode -
Sony/Canon LANC Camcorder in Photo mode -
Sony
Samsung A402
Olympus
Digital Concepts 2.1 (DC 2.1)
DVR - Wireless (DVR control mode for wireless video cameras) 
Olympus
Picture Mode Setting
Switch 5
Down/Off
Down/Off
Down/Off
Down/Off
Up/On
Up/On
Up/On
Up/On
Switch 5
Down/Off
Down/Off
Down/Off
Down/Off
Up/On
Up/On
Up/On
Up/On
Switch 6
Down/Off
Down/Off
Up/On
Up/On
Down/Off
Down/Off
Up/On
Up/On
Switch 6
Down/Off
Down/Off
Up/On
Up/On
Down/Off
Down/Off
Up/On
Up/On
Switch 7
Down/Off
Up/On
Down/Off
Up/On
Down/Off
Up/On
Down/Off
Up/On
Switch 7
Down/Off
Up/On
Down/Off
Up/On
Down/Off
Up/On
Down/Off
Up/On
Switch 8 controls the operation of the attached camera. You can either setup your camera in digital still mode, or movie/double photo mode. If you want to take digital movies with your digital camera you must have your digital camera setup in movie mode. If your camera setting is in RSP mode, however, you can setup Charge Mode On/Off, which is used to keep your camera settings. Note, when the board is setup in LANC mode these setting will not apply. You must follow the “LANC Video Delay Setting” listed below.
Picture Mode
Still / RSP Charge Mode off
Movie or Double Photo / RSP Charge Mode On
Switch 8
Down/Off
Up/On
Camera Mode Setting
Switch 9 controls fast/slow camera operation. This is useful for setting up fast/slow refresh mode in RSS camera mode, or setting up a delay for larger memory cards. If switch 8 is setup in “Movie Mode” then this switch setting is for 10 or 15 second movie clip, or the time delay between double photo modes. If you want to take digital movies with your digital camera you must have your digital camera setup in movie mode. Note, when the board is setup in LANC mode these setting will not apply. You must follow the “LANC Video Delay Setting” listed below.
Camera Mode
Fast / 10 second digital movie clip
Slow / 15 second digital movie clip
Switch 9
Down/Off
Up/On
Version | Page 6 of 12 | Draft |
TS S40.01 | This document comprises information provided by Suppliers and is |
|
| assumed to be correct. |
|
