Paper

Use only Sony UPP-110S/110HD/110HG paper designed for use with this unit. High print quality cannot be guaranteed if any other paper is used with this unit, and such paper could damage the unit.

You cannot use the UPP-110HA as specified for the UP-D890/890 series printer.

Paper You Can Use

Print paper characteristics are as follows.

Print Characteristics

Paper Type

TYPE I (Normal)

UPP-110S

 

 

TYPE II (High Density)

UPP-110HD

 

 

TYPE V (High Glossy)

UPP-110HG

 

 

Notes on storing and handling paper
Storing unused paper

•Store unused paper at a temperature below 30°C (86°F) in a dry location that is not exposed to direct sunlight.

•Do not store unused paper near volatile liquids or allow the paper to contact any organic volatile liquid, cellophane tape, or any compound of vinyl chloride.

Loading paper

•Handle the paper carefully when loading to avoid touching the printing surface with your fingers. Perspiration or oil from you hands could cause pictures to blur.

•After removing the label from the leading edge of the paper, pull the paper out 15~20 cm (about 6~8 in.) before printing. Label adhesive remaining on the paper could spoil a picture.

Storing printouts

•To prevent printouts from fading or changing color, store them in a cool, dry location where the temperature is not higher than 30°C (86°F).

•Store printouts in a polypropylene pouch or between sheets of paper that contain no plastic.

•Do not store printouts where they will be exposed to direct sunlight or high humidity.

•Do not store printouts near volatile liquids or allow the prints to contact any organic volatile liquid, cellophane tape, or any compound of vinyl chloride.

•To prevent fading, do not stack printouts on or under a diazo copy sheet.

•To mount printouts on another sheet of paper, use double-sides tape or a water base adhesive.

•Do not incinerate waste printer paper.

Loading Paper in the Unit

Notes

•Before loading paper in the unit, see “Notes on storing and handling paper” (page 7).

•Always handle paper carefully when loading to avoid adversely affecting the quality of the printouts. Never bend or crease the paper and never touch the printing surface with your fingers. Fingerprints perspiration can blur printing.

•Do not use any paper other than UPP-110S/110HD/ 110HG paper. (page 7)

•Be sure to set the “MEDIA” of the menu to the paper to be used. (page 10) You can confirm the media currently selected on the LCD.

For detailed information on how to confirm, see “Paper currently selected” on page 14.

Loading Paper

Caution

A paper cutter is mounted with the unit. When loading paper, be careful not to touch the paper cutter. Touching the paper cutter may cause injury.

1 Press the power ON/OFF switch to turn the unit on. When paper is not loaded yet, the back light on the LCD lights in umber and the message “EMPTY” is displayed.

Started Getting

Paper / Loading Paper in the Unit

7