4 Place the paper roll in the paper cartridge.
Thermal head
Caution
•Since the thermal head is still very hot just after printing is finished, be careful not to touch the thermal head when placing the paper roll in the paper holder. Touching the thermal head may burn you.
•Do not place the paper roll on any part of the printer other than the paper cartridge. Doing so may damage the printer. Especially do not place it on the thermal head.
5 Remove the tape attached at the center of the paper roll.
6 While holding both ends of the paper roll, insert the paper roll into the paper cartridge. Feed in the paper with your hand until the marking hole becomes blue.
Note
Turn the paper roll while pushing it with both hands so that the paper roll does not loosen.
Marking hole
Turn the paper roll until the marking hole becomes blue, while pushing it with both hands so that the paper roll does not loosen.
Notes
•Be sure to remove all of the pieces of tape attached to the paper roll. A seal remaining inside the printer may cause problems.
•Do not touch the printing surface of the paper roll in the paper holder after loading it. Sweat or dirt from your hands, or folded paper may have an influence on the quality of the printout.
7 Push the paper cartridge back in as it was.
Operation
Loading the Paper Roll and Ink Ribbon | 13 |
|
|