5
Location and Function of Parts and Controls
Introduction
GIndicators
The indicators are as shown below:
ACLEANING indicator
Lights while cleaning is in progress.
BRIBBON/PAPER indicator
Lights when an error involving the ink ribbon or
paper occurs.
CALARM indicator
Lights when an error such as a paper jam occurs.
DPRINT indicator
Lights while printing is in progress.
The location and cause of an error can be determined
according to which of the indicators (PRINT,
ALARM, RIBBON/PAPAER and CLEANING) are
on or flashing. For details, refer to “Explanation of
Indicators” on page 22.
HSTOP button (page 13)
Press this button to stop a continuous printing
operation.
When this button is pressed, the printer returns to
ready state after the current page is printed and
ejected.
Rear
A USB connector
Connects to a computer equipped with the USB
interface (which conforms to USB 2.0), using a USB
cable (supplied).
BVent openings
C~AC IN connector (page7)
Use the power cord provided.
DSecurity slot
Used to attach a security cable.
EUSB cable stopper (page7)
Fixes the USB cable to prevent it from being
disconnected.