Accessories for Operational Convenience and Sy
Interface boards
IFB Series
Signal interface switcher
PC-1271/1271M
5 BNC input/output
IFB-12
• Accepts analog RGB, component (Y/R-Y/B-Y), HDTV (Y/PB/PR),
HDTV (GBR), composite video and S video signals
• RGB bandwidth of 300MHz
• Cable compensation function for output signals (150MHz)
Analog RGB input (D-sub 9-pin)
IFB-20
• RGB bandwidth of 120MHz
Digital RGB input (D-sub 9-pin)
IFB-30
• RGB bandwidth of 30MHz
• Monochrome/8 color/16 color/64 color mode switchable
Analog RGB input/output (HD D-sub 15-pin)
IFB-21
• RGB bandwidth of 150MHz
Composite/Y/C video input
(Loop-through BNC/Loop-through Mini DIN 4-pin)
IFB-1000
Interface unit
IFU-1271/1271M
• Provides eight slots for optional interface
boards. By
using
two PC-1271/1271M
switchers, a maximum of 16 inputs can be
connected simultaneously.
• Remote control capability with the
RM-PJM800 and RM-1270S*1. The
switcher can also be controlled with a
custom-made remote control unit via the
REMOTE 2 (D-sub 25-pin).
•
Switcher can be connected to the projector
by
connecting
a CCQ-BRS or SIC-M multi-
cable*
2
(50m) via the REMOTE 1.
Incorporates a cable length compensation
switch to maintain the RGB bandwidth of
70MHz when using the multi-cable. A
150MHz RGB bandwidth is guaranteed for
Monitor OUT.
• When one of the input selection switchers
is selected, the front panel of the chosen
interface board automatically illuminates.
•
When power is turned on, the PC-1271/
1271M reconnects the channel used
immediately before the power was turned off.
• Mountable in an EIA 19-inch rack with the
supplied rack mount kit.
*1
The RM-PJM800 is supplied with the VPL-V800Q/V800QM
.
The RM-1270S is supplied with the PC-1271/1271M.
*2These cables are not available in some areas. For
details, please consult your nearest Sony office.
• Distributes an input signal from the IFB
board into two outputs with 120MHz
bandwidth.
• The IFU-1271/1271M converts signals
from digital signal level to analog signal
level (TTL to 0.7Vp-p) for output.