Sony VGN-A600 quick start Select Ok, and press Enter. The computer restarts

VAIO® Computer Quick Start

4Press the Right Arrow key to select the Exit tab, and then press the Down Arrow key to select Get Default Values. The message Load factory default values. appears.

5Press the Enter key. The Load Optimal Defaults? window appears.

6Select Ok, and press Enter.

7Select Exit (Save Changes), and press Enter. The Save configuration changes and exit setup? window appears.

8Select Ok, and press Enter. The computer restarts.

✍If this occurs on a regular basis, contact Sony Computing Support (http://www.sony.com/pcsupport).

What do I do if the message “Operating system not found” appears when my computer starts, and why won’t Windows start?

❑Make sure the computer does not have a “non-bootable” floppy disk in the floppy disk drive (if applicable).

❑If a non-bootable floppy disk is in the drive:

1 Remove the floppy disk.

2 Restart the computer and confirm that the Microsoft® Windows® operating system starts properly.

❑If the Windows operating system still does not start, follow these steps to initialize the BIOS:

1 If there is a disk in the floppy disk drive, then remove it.

2 Turn off the computer.

3 Remove any peripheral devices connected to the computer.

4 Restart the computer.

5 Press the F2 key when the VAIO logo appears. The BIOS Setup window appears.

6 Press the Right Arrow key to select the Exit menu.

7 Press the Down Arrow key to select Get Default Values. The message Load factory default values. appears.

44