n154 N

Troubleshooting

Why can't I use the built-in MOTION EYE camera?

❑The built-in MOTION EYE camera cannot be shared by more than one software application. If another software application is using the camera, exit the application before using the built-in MOTION EYE camera.

❑You cannot use the built-in MOTION EYE camera if the screen view is rotated. Restore the standard screen view.

❑If the problem persists, you must reinstall the driver software for the camera. Follow these steps: 1 Click Start and then Control Panel.

2 Click the Performance and Maintenance icon.

3 Click the System icon.

4 Click Device Manager on the Hardware tab.

5 Double-clickImaging devices.

6 Right-clickSony Visual Communication Camera VGP-VCC3 and click Update Driver.

What should I do if my computer becomes unstable when it enters Standby or Hibernate mode while the built-in MOTION EYE camera is in use?

❑Do not place your computer into Standby or Hibernate mode while you are using the built-in MOTION EYE camera.

❑If your computer automatically enters Standby or Hibernate mode, change the corresponding power saving mode setting. For changing the setting, see Using the Power Saving Modes (page 118).