Sony VPH-V20M Specifications, Distributed by, Printed in Japan, Sony Corporation, Accessories

VPH-V20M Specifications

Optical

Projection system:	3 picture tubes, 3 lenses, direct projection system
CRT:	7-inch (Phosphor size: 5.5-inch) liquid cooled high
	brightness monochrome tubes
Projection lens:	High performance hybrid multi-coated lens F1.0/130 mm
Screen:	70-inch (177.8 cm) to 250-inch (635 cm) measured
	diagonally (Factory preset: 100-inch (254 cm))
Light output:	ANSI 100 lm (15 kHz: 60 Hz, 6500 K)
	Peak white: 700 lm	All white: 140 lm
Throwing distance:	100-inch (254 cm):	3301 mm (Approx. 11 ft)
	200-inch (508 cm):	6417 mm (Approx. 21 ft)

Signals

Color system:	NTSC, PAL, SECAM, NTSC4.43 automatically selected
Resolution:	700 TV lines (Composite video input)
	1000 TV lines (RGB input)
Test signals:	Cross hair

General

Power requirements:	220 V AC to 240 V AC, 50/60 Hz
Power consumption:	210 W
Operating temperature:	0 to 40 ºC (14 to 104 ºF)
Operating humidity:	35 to 85 %
Storage temperature:	-20 to 60 ºC (-4 to 140 ºF)
Storage humidity:	10 to 90 %
Dimensions:	532 (W) ⋅ 288 (H) ⋅ 597 (D) mm
	(21 ⋅ 11 3/8 ⋅ 23 5/8 inches)
Mass:	Approx. 30 kg (66 lb 2 oz)
Heat dispersion:	716.6 BTU

Inputs/Outputs

VIDEO IN:
Video*:	BNC	1.0	Vp-p ±2 dB, sync negative, 75 Ω
S video*:	Mini DIN 4-pin		Vp-p ±2 dB, sync negative, 75 Ω
	Y (luminance):	1.0
	C (chrominance): Burst 0.286 Vp-p ±2 dB (NTSC), 75 Ω
		or 0.3 Vp-p ±2 dB (PAL), 75 Ω
VIDEO OUT:
Video:	BNC	1.0	Vp-p ±2 dB, 75 Ω

*S video has priority over the video input.

INPUT A:

Analogue RGB/Component: BNC

R/R-Y:0.7 Vp-p ±2 dB, positive, 75 Ω

G:0.7 Vp-p ±2 dB, positive, 75 Ω

G with Sync/Y:	1.0 Vp-p ±2 dB, sync negative, 75 Ω
B/B-Y:	0.7 Vp-p ±2 dB, positive, 75 Ω
SYNC/HD:
Composite sync:	0.6~8.0 Vp-p,
	high impedance negative
Horizontal sync:	0.6~8.0 Vp-p,
	high impedance negative
VD:
Vertical sync:	0.6~8.0 Vp-p,
	high impedance negative

CONTROL S:Loop-through Stereo Mini Jack

SafetyRegulations

EN60 065 (TÜV), CE, C-Tick, PTB

Accessories

Supplied accessories:	Remote commander RM-PJV20
	AA size Batteries (⋅ 2) for remote commander
	AC power cord
	Spacer for 508 cm (200-inch ) front projection
	Spacer (0.2 mm) for 254 cm (70 to 100-inch)
	rear projcetion
	Spacer (0.8 mm) for 254 cm (70 to 100-inch)
	rear projection
	Operating manual
	Installation manual
Optional accessories:	Siganl Interface Cable	SIC-10
	Interface Unit	IFU-1271M
	Suspension Support	PSS-722
		PSS-10
	Remote Control Receiver	RM-PJ10
	80-inch flat screen	VPS-80FH
	100-inch flat screen	VPS-100FH
	120-inch flat screen	VPS-120FH
	70-inch rear screen	VPS-702R

Distributed by

Connector

Control Panel

© 1998 Sony Corporation. All rights reserved.

Reproduction in whole or in part without written permission is prohibited. Features and specifications are subject to change without notice.

All non-metric weights and measures are approximate. Sony and Betacam are trademarks of Sony Corporation.

All other trademarks are the property of their respective owners.

	Printed in Japan
MK7168/1OHB(8/98)	©1998 Sony Corporation