9
Location of Controls
aVentilation holes (intake)/Air
filter cover
bAdjusters (fore pad)
cLamp cover
dAdjuster
Adjusts the picture position. (1 page
23)
eS VIDEO INPUT connector (mini
DIN 4-pin)
Connects to the S video output of video
equipment.
fVIDEO INPUT connector (phono
type)
Connects to the video output of video
equipment.
gINPUT A connector (HD D-sub
15-pin, female)
Inputs a computer signal, video GBR
signal, component signal, or DTV signal
depending on the connected equipment.
Connects to the output connector of
equipment using the supplied cable or an
optional cable.
hHDMI connector
Connects to the video output connector
of the video equipment or the computer
equipped with HDMI/DVI output
connector (digital).
iSERVICE RS-232C connector
(D-sub 9-pin, female)
Used for service only.
This is not for customers’ use.
jAC IN socket
Connects the supplied AC power cord.
kAdjuster adjustment button
Press to pull out the adjuster. (1 page
23)
lSecurity bar
An anti-theft chain or wire
(commercially available) can be
connected to this bar.
If it is difficult to pull out, pull out the
security bar using a screwdriver.
mSecurity lock
Connects to an optional security cable
(from Kensington).
Web page address:
http://www.kensington.com/
To maintain optimal performance, clean the
air filter whenever you replace the lamp. (1
page 51)
Note
Security bar