Before using the Remote

Commander

Pull out the clear film from the lithium battery holder.

To replace a battery

1 Release the lock of the lithium battery holder by picking it, and pull out the holder from the Remote Commander.

2 Install the lithium battery.

Notes on Remote Commander operation

•Make sure that nothing obstructs the infrared beam between the Remote Commander and the remote control detector on the projector. Direct the Remote Commander toward the remote control detector.

•The operation range is limited. The shorter the distance between the Remote Commander and the remote control detector is, the wider the angle within which the commander can control the projector becomes.

Overview

Face the + side up.

3 Put the lithium battery holder back into the Remote Commander.

Notes on the lithium battery

•A button type lithium battery (CR2025) is used in the Remote Commander. Do not use batteries other than CR2025.

•Keep the lithium battery out of the reach of children.

•Should the battery be swallowed, immediately consult a doctor.

Location and Function of Controls

7