Sony VPL-CS21 manual Model Name, Preset Signal FH kHz FV Hz Sync

Specifications

Model Name	VPL-CX21	VPL-CS21
Optical
Projection System	3 LCD panels, 1 lens projection system
Panel	0.63-inch XGA LCD panel, 786,432 (1024 x 768) x 3	0.63-inch SVGA LCD panel, 480,000 (800 x 600) x 3
Lens	Approx. 1.2 times, F 1.6 to 1.94, f 18.8 to 22.6mm
Lamp	165/125 W Ultra high pressure lamp
Lamp Life	2000H (lamp mode high) / 3000H (lamp mode standard)*2
Screen Size	40 to 300 inches (measured diagonally), 40 to 150 inches (auto focus operation range)
Light Output	2100 ANSI lumens (lamp mode high) / 1600ANSI lumens (lamp mode standard)
Throwing Distance*1	80” screen – 2.3-2.8m, 100” screen – 2.9-3.6m
Contrast (all white & black)	300:1(MAX)
Signals
Colour System	NTSC3.58, PAL, SECAM, NTSC4.43, PAL-M, PAL-N, PAL60
Resolution	Video – 750 TV lines, RGB – 1024 x 768 pixels	Video – 600 TV lines, RGB – 800 x 600 pixels
Acceptable Signal	Computer, fH: 19-92KHz, fV: 48-92Hz (Up to SXGA + (60Hz)), Video - 15kHz RGB/Component 50/60Hz, Progressive Component50/60Hz,
	DTV(480/60I, 575/50I, 480/60P, 720/60P, 720/50P, 1080/60I, 1080/50I), Composite Video, Y/C Video
General
Speaker	Mono speaker system 40 x 20 mm Max. 1W
Power Requirements	AC 100 to 240V, 2.2 - 1.0A, 50/60Hz
Power Consumption	Max – 220W, Standby – 0.8W
Operating Temperature	0 to 35 C degrees (32 to 95 F degrees)
Operating Humidity	35 to 85% (no condensation)
Storage Temperature	-20 to 60 C degrees (-4 to 140 F degrees)
Storage Humidity	10 to 90 %
Dimension (W x H x D)	273 x 210 x 52mm/inches (without the projection parts)
Weight	2kg
Fan Noise	32 dB (lamp mode standard) / 41 dB (lamp mode high.)
Keystone Correction Range	Max. +/- 15 degrees vertically
Heat Dissipation	750.7 BTU
OSD (language)	15-language (English, French, German, Italian, Spanish, Portuguese, Japanese,
	Chinese (Simplified, Traditional), Korean, Russian,Dutch, Norwegian, Swedish, Thai)
Input / Output
Audio/Video	A/V Multi, VIDEO: composite video: 1V p-p+/-2dB sync negative (75 ohms terminated), S Video: Y/C(luminance): 1Vp-p+/-2dB sync negative (75 ohms terminated),
	C(chrominance): burst 0.286Vp-p+/- 2dB(NTSC)(75 ohms terminated), burst 0.3Vp-p+/-2dB (PAL) (75 ohms terminated)
	AUDIO: rated input 500mVrms, input impedance 47kiloohms
Input A	HD D-sub 15-pin (female), Analog RGB/Component: R/R-Y: 0.7Vp-p+/-2dB (75 ohms terminated), G: 0.7 Vp-p+/-2dB (75 ohms terminated),
	G with sync/Y: 1V p-p+/-2dB sync negative (75 ohms terminated), B/B-Y: 0.7Vp-p+/-2dB (75 ohms terminated), SYNC/HD:composite sync input : TTL level, positive/negative,
	Horizontal sync input: TTL level positive/negative,VD: verticalsync input: TTL level positive/negative
Safety Regulations
Safety Regulations	UL1950, cUL (CSA 60950), FCC Class B, IC Class B, NEMKO (EN60950), CE (LVD, EMC), C-Tick, Denan, VCCI Class B,(CCC-for China model only)
Supplied Accessories	Remote Commander : RM-PJ5, Lithium battery; CR2025 (1), HD D-sub 15-pin cable (2m) (1), A/V connecting adaptor (1) , Carrying Case, Security Label,
	Operating Instructions (CD-ROM), Quick Reference Manual (printed), Safety regulations booklet (printed) (Warranty card@local), (AC Power Cord, 2 pole @local)
Battery information
Battery for Remote Commander	Category: battery lithium, Type: CR2025, Weight of single battery (g): 2.3g, Number of batteries per package: 1
Optional Accessory	Projector Lamp: LMP-C163 (for replacement), Presentation Kit: RM-PJPK1

*1 The following distance in this chart is “design value” and the tolerance is not included. Therefore the values are different from the ones in the “Installation Diagram” (page 5)

*2 The number is approximate. This value varies depnding on the environment or how the projector is used. Note: Specifications are subjected to change without prior notice.

Preset Signals

No.		Preset Signal	fH (kHz)	fV (Hz)	Sync
1	VIDEO/60	60Hz	15.734	59.940	-
2	VIDEO/50	50Hz	15.625	50.000	-
3	3480/60i	480/60i	15.734	59.940	S on G/Y
4	4575/50i	575/50i	15.625	50.000	S on G/Y
5	480/60p	480/60p (progressive component)	31.470	60.000	S on G/Y
6	575/50p	575/50p (progressive component)	31.250	50.000	S on G/Y
7	1080/60i	1035/60i, 1080/60i	33.750	60.000	S on G/Y
8	1080/50i	1080/50i	28.130	50.000	S on G/Y
9	720/60p	720/60p	45.000	60.000	S on G/Y
10	720/50p	720/50p	37.500	50.000	S on G/Y
11	640 x 350	VGA mode1	31.469	70.086	P/N
12		VGA VESA 85Hz	37.861	85.080	P/N
13	640 x 400	PC-9801 Normal	24.823	56.416	N/N
14		VGA mode 2	31.469	70.086	N/P
15		VGA VESA 85Hz	37.861	85.080	N/P
16	640 x 480	VGA mode 3	31.469	59.940	N/N
17		Macintosh 13"	35.000	66.667	N/N
18		VGA VESA 72Hz	37.861	72.809	N/N
19		VGA VESA 75Hz	37.500	75.000	N/N
20		VGA VESA 85Hz	43.269	85.008	N/N
21	800 x 600	SVGA VESA 56Hz	35.156	56.250	P/P
22		SVGA VESA 60Hz	37.879	60.317	P/P
23		SVGA VESA 72Hz	48.077	72.188	P/P
24		SVGA VESA 75Hz	46.875	75.000	P/P
25		SVGA VESA 85Hz	53.674	85.061	P/P
26	832 x 624	Macintosh 16"	49.724	74.550	N/N
27	1024 x 768	XGA VESA 60Hz	48.363	60.004	N/N
28		XGA VESA 70Hz	56.476	69.955	N/N
29		XGA VESA 75Hz	60.023	75.029	P/P
30		XGA VESA 85Hz	68.677	84.997	P/P
31	1152 x 864	SXGA VESA 70Hz	63.995	70.019	P/P
32		SXGA VESA 75Hz	67.500	75.000	P/P
33		SXGA VESA 85Hz	77.487	85.057	P/P
34	1152 x 900	SUN LO	61.795	65.960	N/N
35	1280 x 960	SXGA VESA 60Hz	60.000	60.000	P/P
36		SXGA VESA 75Hz	75.000	75.000	P/P
37	1280 x 1024	SXGA VESA 60Hz	63.974	60.013	P/P
38		SXGA VESA 75Hz	79.976	75.025	P/P
39*		SXGA VESA 85Hz	91.146	85.024	P/P
40	1400 x 1050	SXGA + 60Hz	63.981	60.020	N/N

Optional Accessiories

Projector Lamp (For Replacement) Presentation Tool Kit

LMP-C163 RM-PJPK1

Lead-free solder is used for soldering all parts including circuit component electrodes. Halogenated flame retardants are not used in cabinets.

Polystyrene foam for the packaging cushions is not used in packaging.

*For memory no. 39, the smart APA function and the APA key on the remote commander are not active. Make adjustments for the input signal using the Adjust signal on the input setting menu.