Sony VPL-FH500L Connecting the Projector

8Connecting the Projector
B Preparation
Connecting the Projector
• Turn off all equipment before making any connections.
• Use the pro per cables for each connection.
• Insert the cab le plugs firmly; Loose connections may reduce performance of picture signals or
cause a malfunction. When pulling out a cable, be sure to grip it by the plug, not the cable itself.
• For more information, refer also to the instruction manuals of the equipment you are connecting.
Connection with a computer is explained for each input signal.
INPUT A
For connection when there is some distance between a computer and the projector.
INPUT B
For connecting a computer with an RGB output connector.
It is recommended that you set the resolution of your computer to 1920 × 1200 pixels (VPL-
FH500L) or 1024 × 768 pixels (VPL-FX500L) for the external monitor.
Notes
Connecting a Computer
R/PRG/Y B/PBHD VD
INPUT A
Mini D-sub 15-pin – BNC cable
(notsupplied)
RGB output
connector
Computer
Note
INPUT B RGB
Mini D-sub 15-pin
cable (notsupplied)
RGB output
connector
Computer