Location and Function of Controls

Control panel

0

9

8

7

6

LIGHT VOLUME

I / u

1

 

 

ON

 

 

/STANDBY

DP

INPUT

POWER

SAVING

 

 

2

MENU TEMP

/FAN

LAMP /COVER

3

4

RESETENTER

5

1I /u(on / standby) key

Turns on and off the projector when the projector is in the standby mode. The ON/STANDBY indicator lights in green when the power is turned on.

When turning off the power, press the I /ukey twice following the message on the screen, or press and hold the key for about one second.

For details on steps for turning off the power, see “To turn off the power” on page 23 (EN).

2Indicators

ON/STANDBY: Lights up or flashes under the following conditions:

•Lights in red when the AC power cord is plugged into the wall outlet. Once in the standby mode, you can turn on the projector with the

I / ukey on the Remote Commander or on the control panel.

•Lights in green when the power is turned on.

•Flashes in green while the cooling fan runs after turning off the power with the I / ukey. The fan runs for about 90 seconds after turning off the power.

The ON/STANDBY indicator flashes quickly for the first 30 seconds.

During this time, you cannot turn the power back on with the I / ukey.

POWER SAVING: Lights up when the projector is in the power saving mode. When POWER SAVING in the SET SETTING menu is set to ON, the projector goes into the power saving mode if no signal is input for 10 minutes. Although the lamp goes out, the cooling fan keeps running. In the power saving mode, any key does not function for the first 30 seconds. The power saving mode is canceled when a signal is input or any key is pressed.

TEMP (Temperature)/FAN: Lights up or flashes under the following conditions:

•Lights up when temperature inside the projector becomes unusually high.

•Flashes when the fan is broken.

LAMP/COVER: Lights up or flashes under the following conditions:

•Lights up when the lamp has reached the end of its life or becomes a high temperature.

•Flashes when the lamp cover or air filter cover is

not secured firmly.

For details on the LAMP/COVER and the TEMP/FAN indicators, see page 36 (EN).

3INPUT key

Selects the input signal. Each time you press the key, the input signal switches between video/audio input and INPUT-A connector.

10 (EN)