Location and Function of Controls
!º CONTROL S OUT jack (stereo minijack)
This jack does not operated with this unit.
Note
The Remote Commander does not function if the cable is connected to this jack.
!¡ ENTER key
!™ MENU key
!£ APA (Auto Pixel Alignment) key
This key does not operated with this unit.
!¢ MUTING keys
Cut off the picture and sound.
PICTURE: Cuts off the picture. Press again to restore the picture.
AUDIO: Cuts off the sound from speakers and AUDIO OUT jack. Press again or press the VOLUME + key to restore the sound.
!° COMMAND ON/OFF switch
When this switch is set to OFF, no key on the Remote Commander function. This saves the battery power.
!§ Transmission indicator
Lights up when you press a key on the Remote Commander.
This indicator does not light up when you use the laser pointer.
!¶ Infrared transmitter
!• Laser transmitter
!ª L CLICK key
Functions as a left button on a mouse. When connected to a Macintosh computer, the L CLICK key functions as a mouse button.
Battery installation
1 Push and slide to open the lid.
2 Install the two size AA (R6) batteries (supplied) with the correct polarity.
Be sure to install the battery from the ’ side.
3 Replace the lid.
Notes on batteries
•Make sure that the battery orientation is correct when inserting batteries.
•Do not mix an old battery with a new one, or different types of batteries.
•If you will not use the Remote Commander for a long time, remove the batteries to avoid damage from battery leakage. If batteries have leaked, remove them, wipe the battery compartment dry and replace the batteries with new ones.
Notes on Remote Commander operation
•Make sure that there is nothing to obstruct the infrared beam between the Remote Commander and the remote control detector on the projector.
•The operation range is limited. The shorter the distance between the Remote Commander and the projector is, the wider the angle within which the commander can control the projector.
16 (EN)