Connecting
Connecting with a VCR/Component Equipment
This section describes how to connect the projector with a VCR, external active speakers, and component equipment.
For details on how to connect a computer, see page 18 (EN).
Also refer to the instruction manuals of equipment to be connected.
When making connections, be sure to:
•turn off all equipment before making any connections.
•use the proper cables for each connection.
•insert the plugs of the cables properly; plugs that are not fully inserted often generate noise. When pulling out a cable, be sure to pull it out from the plug, not the cable itself.
| VCR |
|
|
| to S video | to audio/video outputs1) | |
| output1) |
| |
|
| Audio/video cable | |
| (not supplied) |
| (supplied) |
Right side | S VIDEO | VIDEO | |
|
|
| |
|
|
| AUDIO OUT |
|
|
| AUDIO IN |
INPUT A | MOUSE |
Active speakers
1) When both the S VIDEO and VIDEO jacks are connected to the external equipment, the input signal from the S VIDEO jack is selected.
Right side | S VIDEO | VIDEO |
| |
|
|
|
| |
|
|
|
| AUDIO OUT |
|
|
|
| AUDIO IN |
|
| INPUT A | MOUSE |
|
|
|
| Stereo audio | |
| 3X phono jack ˜HD |
|
| |
|
|
| connecting cable | |
|
|
| ||
| Component equipment | (not supplied) | ||
|
| |||
to component output
Note
Set the aspect ratio using ASPECT in the INPUT SETTING menu according to the input signal.
20 (EN)