To turn off the power

1 Press the I / ukey on the Remote Commander or on the control panel.

The following message appears to confirm if you want to turn off the power.

P OW E R O F F ?

P l e a s e p r e s s I / u k e y a g a i n .

Note

The message will disappear if you press any key except the I / ukey, or if you do not press any key for five seconds.

2 Press the I / ukey on the Remote Commander or on the control panel again.

The ON/STANDBY indicator flashes in green and the fan continues to run for about 90 seconds to reduce the internal heat. Also, the ON/ STANDBY indicator flashes quickly for the first 30 seconds. During this time, you will not be able to turn the power back on with the I / u key.

3 Unplug the AC power cord from the wall outlet after the fan stops running and the ON/STANDBY indicator lights in red.

When you cannot confirm the on-screen message

When you cannot confirm the on-screen message in a certain condition, you can turn off the power by holding the I / ukey on the Remote Commander or on the control panel for about one second.

Note

Do not unplug the AC power cord while the fan is still running; otherwise, the fan will stop although the internal heat is still high, leading to breakdown of the projector.

23 (EN)