The INPUT SETTING Menu

The INPUT SETTING menu is used to adjust the input signal.

Unadjustable items depending on the input signal are not displayed in the menu.

When the video signal is input

V I D E O

I N P U T S E T T I N G

A S P E C T : 4 : 3

N o . 0 1

 

 

Memory No.

 

 

V I D E O / 6 0

 

 

Signal type

When the RGB signal is input

I N P U T – A

I N P U T

S E T T I N G

 

D O T

P H A S E : 5

 

S I Z E

H : 1 0 5

6

S H I F T H : 2 1 9

V : 1 7

N o

. 1 7

 

Memory No.

0 0

8 0 0 X 6

 

Signal type

Operation

1. Select an item

Use the Vor vkey to select the item, then press the b or ENTER key.

2. Adjust an item

• When changing the adjustment level:

To increase the number, press the Vor bkey. To decrease the number, press the vor Bkey. Press the ENTER key to restore the original screen.

• When changing the setting:

Press the Vor vkey to change the setting.

Press the ENTER or Bkey to restore the original screen.

DOT PHASE

Adjusts the dot phase of the LCD panel and the signal input from the INPUT A connector.

Adjust the picture to where it looks clearest.

D O T P H A S E : 5

You can directly display the menu above with the DP key on the control panel.

SIZE

Adjusts the horizontal size of picture input from the INPUT A connector.

S I Z E H : 1 0 5 6

The higher the setting, the larger the horizontal size of the picture.

The lower the setting, the smaller the horizontal size of the picture. Adjust the setting according to the dots of the input signal. For details on the suitable value for the preset signals, see page 28 (EN).

SHIFT

Adjusts the position of the picture input from the INPUT A connector.

S H I F T H : 2 1 9 V : 1 7

H adjusts the horizontal position of the picture. V adjusts the vertical position of the picture.

As the setting for H increases, the picture moves to the right, and as the setting decreases, the picture moves to the left.

As the setting for V increases, the picture moves up, and as the setting decreases, the picture moves down. Use the Bor the bkey to adjust the horizontal position and the Vand vkey for the vertical position.

(Continued)

27 (EN)