Projecting
4
5
Turn the zoom ring to adjust the size of the picture.
Turn the focus ring to adjust the focus.
Note
Do not look into the lens when the projector lamp is on.
To | Press |
Adjust the volume | the VOLUME +/– keys on the control |
| panel or on the Remoter Commander. |
|
|
Cut off the sound | the AUDIO MUTING key on the |
| Remote Commander. To restore the |
| sound, press the AUDIO MUTING key |
| again or press the VOLUME + key. |
|
|
Cut off the picture | the PICTURE MUTING key on the |
| Remote Commander. To restore the |
| picture, press the PICTURE MUTING |
| key again. |
|
|
To get the clearest picture
You can adjust the dot phase when a signal from the computer is input.
For details on DOT PHASE, see page 27 (EN).
1 Press the DP key on the control panel.
2 Press the B/bkey on the Remote Commander or on the control panel to adjust the dot phase.
Adjust the picture to where it looks clearest.
You can also adjust the dot phase through the menu.
For details, see “The INPUT SETTING menu” on page 27 (EN).
22 (EN)