11
Location of Controls

3D Glasses

1Slide switch
Set the switch for a comfortable fit (1
page 40).
2Battery cover
Detach the cover when replacing the
battery (1 page 80).
3LED indicator
Flashes one time every 3 seconds: Power
on
Flashes three times every 3 seconds:
Low battery. Battery capacity is almost
running out.
Flashes three times: Power off
4IR sensor
Receive signals from the 3D Sync
Transmitter.
IR’s entry angle differs according to
distance or usage environment.
Please keep this face clean.
5Filter attachment
Filters are attached to view the 3D video
images.
Do not remove the filters. You cannot view
the 3D video images without them.
6Power button
Power on: Press once
Power off: Hold power button down for
2 seconds
* Auto power off: More than 5 minutes
without IR signal
7Nose pad
Adjust the nose pad for a comfortable fit.
8Temple frames
You can bend (adjust) the temple frames
for a comfortable fit.
Note
Before use: Remove
the battery’s insulating
sheet before using the
product for the first time.
This part receives IR
(infrared rays) from the
3D Sync Transmitter.
Note