Sony VPL-VW95ES To adjust the tilt of the installation surface, Lens Focus adjustment window (test pattern)

24
The range to move the picture projected on the screen can be adjusted only within the octagon area
illustrated below. In this connection, see “Positioning the Projector and a Screen” (1 page 16) as
well.
To adjust the tilt of the installation surface
If the projector is installed on an uneven surface, use the adjusters to keep the projector
level.
• Pointing the projector at too high or too low of a tilt will result in trapezoidal distortion in the
projected image.
• Be careful not to catch your finger when turning the adjusters.
Lens Focus adjustment window (test pattern)
Note
Notes
Range of movement of
the projected picture
Projected Picture
H: Width of the projected picture
V: Height of the projected picture
Adjusters
Turn to adjust.