7
Connecting the Projector
Preparation
BPreparation
Connecting the Projector• Make sure all the equipment is powered off when connecting the projector.
• Use the proper cables for each connection.
• Insert the cable pl ugs firmly; Loose connections may reduce performance of pi cture signals or
cause a malfunction. When pulling out a cable, be sure to grip it by the plug, not the cable itself.
• For more information, refer also to the instruction manuals of the equipment you are connecting.
• Use a no-resista nce audio cable.
Connection with a computer is explained for each input signal.
INPUT A/INPUT B (INPUT B is available only for VPL-EX120/EX145/EX175)
For connecting a computer with an RGB output connector.
• It is recommended that you set the resolution of your computer to 1024 × 768 pixels for the
external monitor.
Notes
Connecting a Computer
Note
Mini D-sub 15-pin cable (supplied)
Audio cable (Stereo mini plug) (not supplied)
RGB output connector
Audio output connector
Computer