Listening to the Radio

Using the Belt Clip

Precautions

This warranty is valid only in the United States.

FM SENS,

RADIO ON/OFF TUNING +/–

FM MODE,

 

ENTER

or LOCAL DX

 

 

BAND

 

VOL

 

 

2

FX425

PRESET

1 Press the RADIO ON/

RADIO ON/OFF

 

OFF button.

 

2 Press the BAND

BAND

 

button to select the

 

band (FM1, FM2, FM3

 

or AM).

 

3 Press the TUNING +/– buttons to tune in

the desired station.

TUNING

 

To adjust the volume

Set the VOL control.

 

 

To turn off

Press RADIO ON/OFF.

 

 

Notes

If you keep pressing the TUNING + or – button, the frequency digits go up or down quickly. And when you release, the frequency digits go up or down step by step. When the desired station is heard, press the TUNING + or – button again to stop the tuning.

The ST (stereo) indication comes on in the display when receiving an FM stereo broadcast.

If you press the 9 PLAY, 0 or )button while listening to the radio, the tape operation begins.

If you have inserted a cassette with a metallic shell or label, and interference in radio reception occurs, remove the cassette.

Presetting Stations

You can preset up to 20 radio stations, 5 for each FM1, FM2, FM3 and AM bands.

1 Press the RADIO ON/

 

RADIO ON/OFF

 

 

 

 

OFF button.

 

 

 

 

2 Tune in the desired

BAND

b

 

 

station by using the

 

 

 

 

 

BAND and

 

 

TUNING

TUNING +/– buttons.

 

 

 

 

3 Press the ENTER

 

ENTER

 

 

 

 

 

button to enter the

 

 

 

 

presetting mode.

 

 

 

 

The PRESET indication

 

 

 

 

comes on and starts

 

 

 

 

flashing.

 

 

 

 

4 Press one of the

1

2 3

4

5

PRESET buttons 1 to 5 within ten seconds of flashing.

The PRESET indication and the preset number flash.

5 Press the ENTER

ENTER

 

button within ten

 

seconds of flashing.

 

The PRESET indication

 

and the preset number light.

 

To recall the preset station

Press the BAND button to select the band, and then press the corresponding preset button.

Improving Radio Reception

Improving FM reception

Extend the headphones cord or adjust the FM SENS (FX221 for U.S.A., Canada and Central and South America/FX227/FX229/FX421/FX421V/FX423), FM MODE (FX221 for other countries) or LOCAL/DX (FX425) switch.

FX221 (for U.S.A. and

FX221 (for other

Canada) FX227/FX229/

countries)

FX421/FX421V/FX423

 

LOCAL DX FM SENS

MONO ST FM MODE

FX425

 

DX

 

LOCAL

 

Improving AM reception

Rotate the Walkman.

Listening to the Radio Abroad

The frequency range differs depending on the area. If you listen to the radio in an area of different frequency range, change the area indication in the display. To change it, press the ENTER button while the radio is turned on. Press and hold the BAND button until the area indication flashes. Then, press the BAND button again to change the area indications (“U”: USA, Canada and Central and South America; “E”: European and other countries). Press the ENTER button to set the frequency range.

Notes

If you change the frequency range, all the preset stations in the memory will be canceled.

For E area indication, the hour display is on a 24-hour cycle.

If the display shows incorrect information

When you use the Walkman for the first time or when you have left the Walkman without batteries for a long period of time, the display may show incorrect information or the preset stations may not be recalled correctly. If this happens, remove the batteries, and leave until the display goes off. Then insert the batteries and turn on again.

The memories of all the preset stations and the current time will be canceled.

Reset these functions to the desired stations and time.

With the supplied belt clip, you can wear your Walkman on a belt for convenient use.

Removing the Belt Clip

Lift the tab slightly and push down with your finger to remove the belt clip from the Walkman.

Attaching the Belt Clip

Align the belt clip with the grooves on the back of the Walkman and slide the belt clip up until you hear a click, to firmly attach it to the Walkman.

Specifications

Radio Frequency

For U area indication:

FM: 87.5 – 108 MHz (0.1 MHz step)

AM: 530 – 1,710 kHz (10 kHz step)

For E area indication:

FM: 87.5 – 108 MHz (0.05 MHz step)

AM: 531 – 1,602 kHz (9 kHz step)

Power Requirements

3 V DC Batteries AA (R6) × 2 External DC 3 V power sources

Battery Life

(approximate hours when using the batteries specified below)

Battery

Playback

Radio

Sony Alkaline LR6 (SG)

16 hours

33 hours

Sony R6P (SR)

4.5 hours

13 hours

 

 

 

Dimensions

116.5x 86.3 x 34.6 mm (458 x 312 x 138 in.) (w/h/d) incl. projecting parts

Mass 210 g (7.5oz) incl. batteries

Supplied Accessories

Stereo headphones (1)

Belt clip (1)

Optional Accessories

AC power adaptor AC-E30HG

Your dealer may not handle some of the optional accessories listed above. Please ask the dealer for detailed information.

Design and specifications are subject to change without notice.

Dolby noise reduction manufactured under license from Dolby Laboratories Licensing Corporation.

"DOLBY" and the double-D symbol aare trademarks of Dolby Laboratories Licensing Corporation.

Notes on headphones

Concerning Road Safety

Do not use headphones while driving, cycling, or operating any motorized vehicle. It may create a traffic hazard and is illegal in many areas. It can also be potentially dangerous to play your headsets at high volume while walking, especially at pedestrian crossings. You should exercise extreme caution or discontinue use in potentially hazardous situations.

Preventing hearing damage

Do not use headphones at high volume. Hearing experts advise against continuous, loud and extended play. If you experience a ringing in your ears, reduce volume or discontinue use.

Caring for others

Keep the volume at a moderate level. This will allow you to hear outside sounds and to be considerate to the people around you.

Taking Care of Your Walkman

•Do not expose the Walkman to extreme temperatures, direct sunlight, moisture, sand, dust or mechanical shock. Never leave the Walkman in a car parked in the sun.

•Do not wind the headphones cord around the Walkman.

The buttons may be kept pressed, causing unnecessary battery usage.

•Prolonged use may contaminate the tape head. If sound drop-out or excessive noise occurs, clean the head and tape path with alcohol.

Cleaning the head and tape path

FX421/FX421V/FX423/FX425

•Clean the headphones plug periodically for optimum sound. •Do not use alcohol, benzine or thinner to clean the case.

About the Battery Compartment Lid

If the battery compartment lid is detached by an accidental drop, excessive force etc., attach it as illustrated in the numbered order.

2

1

If you have any question or problem concerning your Walkman, please consult your nearest Sony dealer.

LIMITED WARRANTY

Page 2
Image 2
Sony WM-FX421 Presetting Stations, Improving Radio Reception, Listening to the Radio Abroad, Removing the Belt Clip