Sony WM-FX888 Using the Menu, Select, To play, On the main unit:, Emphasizing Sound, On the main unit:, — the BL SKIP mode, On the remote control:, On the remote control:

Using the Menu

Adjusting playback modesTo select playback direction mode

Press MENU repeatedly to set the cursor in the display to MODE. Then press SET to select the desired mode.

To play	Select
both sides repeatedly	s
both sides once	d
from the FWD side

To skip a long blank space— the BL SKIP mode

When the BL SKIP mode is on, the tape is fast-forwarded to the next track if there is a blank space of longer than 12 seconds. You will hear repeated sets of three short beeps when skipping a blank.

On the main unit:

1Press MENU repeatedly to set the cursor in the display to BL SKIP.

2Press SET to show “”.

On the remote control:

1Press MODE repeatedly to show “BL SKIP”.

To play a tape recorded with Dolby* B NR system

Press MENU repeatedly to set the cursor in the display to ; NR (Dolby noise reduction).

Then press SET to show “”.

*Manufactured under license from Dolby Laboratories.

“Dolby” and the double-D symbol are trademarks of Dolby Laboratories.

Emphasizing Sound

On the main unit:

1Press MENU repeatedly to set the cursor in the display to

SOUND.

2Press SET repeatedly to select the sound emphasis of your choice.

On the remote control:

1Press SOUND repeatedly. With each press, the indications change.

The indications change as follows:

RV : Sound Revitalizer. Emphasizes treble sound.

48