Sony XBR-55X900A, XBR-65X900A 2: Connecting the TV

D:\SONY TV\SY130089_H20 (Rev-2)\4462778121_US\US03STU.fm
XBR-65X900A/55X900A
4-462-778-12(1)
11
Getting Started
~
•If using an electric screwdriver, set the
torque at approximately 1.5 N·m
{15 kgf·cm}.
3Attach the under cover.
To detach the Table-Top Stand from the TV,
remove the screws fixed in step 2.
~
•Do not remove the Table-Top Stand for any
reason other than to install corresponding
accessories on the TV.
•Be sure the TV is vertical before turning on.
To avoid uneven picture uniformity do not
power on the TV with the LCD panel facing
down.
•When installing the TV on a wall, remove the
screws from the rear of the TV. Be sure to
store the removed screws in a safe place,
keeping them away from children.
•When attaching the Table-Top Stand again,
be sure to fasten the screws (previously
removed) to the original holes on the rear of
the TV.
2: Connecting the TV
~
•Use an antenna cable connector no greater
than 14 mm thick.
•Use an HDMI cable connector within 12 mm
(thickness) × 21 mm (width).
•Use Sony HDMI cable with “High Speed”
indication for HDMI connection.
•For more information on connections, refer to
the i-Manual.
xShown with a Set Top Box with
HDMI connection
Detaching the Table-Top
Stand from the TV
1
2
3
Set Top Box
(Continued)