D:\SONY TV\SY130089_H20 (Rev-2)\4462778121_US\US03STU.fm
XBR-65X900A/55X900A
4-462-778-12(1)
22
Using a Wall-Mount Bracket
Your TV can be mounted on a wall using a
Wall-Mount Bracket (not supplied) out of the
box as packaged. If the Table-Top Stand is
attached to the TV, the TV may require
detaching the Table-Top Stand; see
page 11 (Detaching the Table-Top Stand
from the TV).
Prepare the TV for the Wall-Mount Bracket
before making cable connections.
Follow the instruction guide provided
with the Wall-Mount Bracket for your
model. Sufficient expertise is required in
installing this TV, especially to determine
the strength of the wall for withstanding
the TV’s weight.
The length of the screw for Wall-Mount
Bracket differs depending on the
mounting hook thickness. Please see
below illustration.
Be sure to store the unused screws and
Table-Top Stand in a safe place until you
are ready to attach the Table-Top Stand.
Keep the screws away from small
children.
~
Read the supplied Safety Booklet for
additional safety information.
Installing the TV against a wall or enclosed area
Make sure that your TV has adequate
ventilation. Allow enough space around the
TV as shown in the illustration.
~
Inadequate ventilation can lead to
overheating of the TV and may cause
damage to your TV or cause a fire.
8-12 mm
Screw
Mounting Hook
Hook attachment on rear of
TV set
Leave at least this much space around the set.
Installed with stand
4 inches
(10 cm)
11 7/8 inches
(30 cm)
4 inches
(10 cm)
2 3/8 inches
(6 cm)
Installed on the wall
Leave at
least this
much space
around the
set.
4 inches
(10 cm)
4 inches (10 cm)
4 inches
(10 cm)
11 7/8 inches
(30 cm)
Never install the TV set as follows:
Air circulation is blocked. Air circulation is blocked.
Wall Wall