14 US
2: Connecting the TV~
•Use an antenna cable connector no greater
than 14 mm thick.
•When connecting the cable to the Cable/
Antenna, input finger tighten only, over
tightening the connection can damage the
TV.
•Before moving the TV, disconnect all of the
cables connected to the TV to prevent
damaging the TV when it is moved.
•Use an HDMI cable connector within 12 mm
(thickness) × 21 mm (width).
•Use Sony HDMI cable with “High Speed”
indication for HDMI connection.
•For connection with Port Replicator, refer to
the installation guide supplied with the Port
Replicator.
•For more information on connections, refer to
the i-Manual.
Detaching the side and rear terminal
covers
The side and rear terminal covers are
factory-attached to the TV.
Before connecting cables, remove the side
and rear terminal covers.
~
•After connecting all cables, re-attach the
side terminal cover to the TV. For the rear
terminal cover, be sure to store the removed
cover in a safe place, keeping it away from
children.
xShown with a Set Top Box with
HDMI connection
~
•Connect 4K devices (4K Media Player, 4K
Set Top Box, etc.) to the HDMI IN 2 or HDMI
IN 1 jack of the TV to enjoy copyright
protected content.
•For the FMP-X1, connect it to the HDMI IN 2
jack only (The availability depends on
region).
Side terminal cover
Rear terminal cover
900 mA MAX
5 V
900 mA MAX
5 V
Set Top Box