A

POWER

SLEEP

BAND RADIO / LINE IN PRESET

TONE

DISPLAY

MENU

ENTER

VOLUME

 

 

 

 

 

TUNE/SELECT

ANTENNA

AMRESET

FM

LINE IN

Setting the clock

1Plug in the unit.

The display will flash “AM 12:00.”

2Press MENU to show the menu display.3Turn TUNE/SELECT clockwise to select “TIME SET,” then press ENTER.

The hour will start to flash in the display.

4Turn TUNE/SELECT clockwise or counterclockwise until current hour appears in the display, then press ENTER.

The hour is set and the minutes start to flash.

5Repeat step 4 to set the minute.
Note

If you do not set the menu within 65 seconds, the setting mode is canceled.

Tip

The preset can be selected by pressing the number button of the remote commander. Press ENTER after the preset number is selected.

–Scan tuning

The unit will automatically scan the selected band. In HD scan, HD Radio stations are scanned.

1Press POWER to turn on the radio.2Press BAND to select the band AM or FM.3Press MENU to show the menu display.

4Turn TUNE/SELECT clockwise or counterclockwise to select “SCAN” or “HD SCAN,” then press ENTER.

Scanning of the selected band starts.

When a station is received, scanning pauses for 3 seconds and then continues.

5When the unit tunes in to the desired station, do any of the following operations to stop scanning.

–Press ENTER on the unit or remote commander.

–Press SCAN or HD SCAN on the remote commander.

6If necessary, turn TUNE/SELECT clockwise or counterclockwise to tune in to the station more precisely.

7Adjust the volume using VOLUME.

Tip

You can scan a station directly by pressing SCAN or HD SCAN on the remote commander.

To listen with the

or

AField strength level indicator B Preset number*
C Band
D Station name

Name of station currently tuned in.

E Frequency
F Text information

Text information transmitted from station.

G Current time

*When you tune in a station by selecting a preset number.

Note

The display item differs depending on the content of a broadcast or the station.

When an HD Radio station is received

x

Adjusting the tone

1Press POWER to turn on the radio.

2Press TONE to show the tone setting display.

3Turn TUNE/SELECT clockwise or counterclockwise to set “TREBLE,” then press TONE.

4Turn TUNE/SELECT clockwise or counterclockwise to set “BASS,” then press

TONE.

5Turn TUNE/SELECT clockwise or counterclockwise to set “SURROUND,” then press TONE.

Tip

The adjustable range of “TREBLE” and “BASS” is from –6 to +6.

“SURROUND” switches “ON” or “OFF.”

Setting the alarm

You can set the unit to turn on automatically at a preset time. The alarm can be set, even if the unit is off.

To deactivate the alarm function, turn TUNE/SELECT clockwise to select “OFF” in step 3.

To stop the alarm

Press POWER on the unit or remote commander.

Tips

•To enter “ALARM TIME SET” mode directly, press and hold ALARM on the remote commander for 2 seconds.

•You can activate or deactivate the alarm function directly by pressing ALARM on the remote commander.

Notes

•If you do not set the menu within 10 seconds, the setting mode is canceled.

•If you do not operate the unit for 60 minutes after alarm sounds, the power is turned off.

•If you select “LINE IN” source in “ALARM TIME SET,” start playback on the external equipment. You cannot control the external equipment from this unit.

Setting the sleep timer

You can enjoy falling asleep to the radio using the builtin sleep timer that turns off the radio automatically after a preset duration.

1Press SLEEP.

“SLEEP” and the digits for the sleep timer duration appear.

Tip

To display the current time, press DISPLAY.

To return to the radio
Press RADIO/LINE IN.

The band (AM or FM) is shown in the display.

Notes

•Refer also to the connected equipment’s manual.

•The supplied audio connecting cable may not be used with some external equipment. In this case, use a cord suitable for the external equipment you are using.

•When you listen to the radio with external equipment connected, turn off the connected equipment because noise may be caused. If noise continues, even when the equipment is turned off, disconnect and place the external equipment away from the unit.

Resetting the unit

The RESET button is located on the rear of the unit. Press this button with a pointed object if the radio fails to function properly. The clock settings and stations you have preset, etc., will revert to the factory preset.

AC power cord

AM FM SIRIUS XM SLEEP ALARM

To change the display to the daylight saving time (summer time) indication
1Press MENU to show the menu display.

2Turn TUNE/SELECT clockwise or counterclockwise to select “DST,” then press

ENTER.
3Turn TUNE/SELECT counterclockwise to select “ON,” then press ENTER.

“ ” appears and the time indication changes to summer time.

To deactivate the DST function, select “OFF” in step 3.

Playing the radio

–Manual tuning

1Press POWER to turn on the radio.

If “LINE IN” is displayed, press RADIO/LINE IN so that the band (AM or FM) appears.

2Press BAND to select the band AM or FM.

3Turn TUNE/SELECT clockwise or counterclockwise to tune in to a desired frequency.

A beep sounds when the minimum frequency of each band is received during tuning.

4Adjust the volume using VOLUME.
headphones

You can enjoy the radio and external equipment connected to the line in by the headphones (not supplied). Connect the headphones (not supplied) to the

i(headphone) jack. The speaker is deactivated when the headphones are connected.

Changing the display mode and settings

To change the display mode
Press DISPLAY.

The display changes as follows:

When an analog radio station is received

x

or

x

If you press DISPLAY for 2 seconds while the display above appears, the beep is heard and the scroll speed of the display item becomes slow.

To return to normal scroll speed, press DISPLAY again for 2 seconds.

AHD indicator

Lights: HD Radio reception level is sufficient (indicator flashes momentarily, and then stays lit).

The sound changes from analog to digital. Flashes: HD Radio reception level is too low.

The sound stays analog.

If a HD Radio station signal is very weak, the indicator will not flash.

B

Field strength level indicator

C

Preset number*

To adjust the hour and minute, see “Setting the clock.”

To set the alarm time

1Press MENU to show the menu display.

2Turn TUNE/SELECT clockwise or counterclockwise to select “ALARM TIME SET,” then press ENTER.

The hour sign starts flashing.

Example of display when unit is off

3

Turn TUNE/SELECT clockwise or

 

counterclockwise to set the hour, then press

 

ENTER.

4

The minute sign starts flashing.

Turn TUNE/SELECT clockwise or

 

counterclockwise to set the minutes, then

 

press ENTER.

5

The source sign starts flashing.

Turn TUNE/SELECT clockwise or

 

counterclockwise to select the source from

 

“RADIO AM,” “RADIO FM,” “LINE IN” or

 

“BUZZER,” then press ENTER.

If you press SLEEP while the unit is turned off, the unit is turned on.

2Press SLEEP repeatedly to select the desired sleep timer setting.

Each press changes the setting time as follows:

60 45 30 15 OFF

A beep sounds when the display returns to “SLEEP 60.”

After about 4 seconds, “SLEEP” lights in the display when the duration time is set.

The unit automatically turns off when the duration time is passed.

To change the sleep timer setting

You can press SLEEP repeatedly to select the desired sleep timer setting even after the sleep timer has been activated.

To deactivate the sleep timer

Press POWER to turn off the unit before the setting time has elapsed, or press SLEEP repeatedly to set the sleep timer to “SLEEP OFF” in step 2.

Using the remote commander

Buttons shared on both the remote commander and the unit control the same functions.

VOL +/– buttons

To adjust the volume.

Press and hold the VOL – button for 2.5 seconds, the volume becomes minimized.

ALARM button

Press to set the alarm to “ON” or “OFF.”

Press and hold for 2 seconds to enter “ALARM TIME SET.”

HD SCAN button

The selected band is scanned, and receivable HD Radio stations are received for 3 seconds in order of frequency.

SCAN button

The selected band is scanned, and receivable radio stations are received for 3 seconds in order of frequency.

BRIGHT button

To adjust the brightness of the display.

Number buttons

To select a preset number (1 to 20).

Press ENTER after the preset number is selected.

If you input the number 0 or more than 21 and press ENTER, “ERROR” appears in the display.

B

POWER

ALARM SLEEP

 

1

2

3

 

4

5

6

 

7

8

9

 

 

0

ENTER

 

 

PRESET

VOL

 

 

 

 

TUNE/

 

 

 

SELECT

TONE

 

 

 

HD SCAN

BAND

 

 

 

RADIO/

 

MENU

SCAN

LINE IN

 

 

BRIGHT

DISPLAY

Size AAA (R03)
The number 5 and the VOL +

⋅ 2

 

buttons have a tactile dot.

Preparing the

When to replace the batteries

With normal use, the batteries should last for about six

remote commander

months. When the remote commander no longer

operates the unit, replace all the batteries with new ones.

Installing the batteries into the remote

Notes

commander (See Fig. B)

• Do not charge dry batteries.

Insert two size AAA (R03) batteries (not supplied).

• When you are not going to use the remote commander

 

for a long time, remove the batteries to avoid any

 

damage caused by leakage and corrosion.

Tip

To attenuate the volume, turn VOLUME counterclockwise quickly.

Note

The frequency cannot be input with the number buttons of the remote commander.

–Preset tuning

You can preset 20 stations each for AM and FM.

Presetting a station

1Follow steps 1 to 3 in “Manual tuning” to tune the frequency you wish to preset.

2Press and hold PRESET for a few seconds.

You will hear a beep.

3Turn TUNE/SELECT clockwise or counterclockwise to select the preset number, then press ENTER.

The frequency is stored in the selected preset number and you will hear a beep.

To preset another station, repeat these steps.

Note

If you try to store another station in the same preset number, the previously stored station will be replaced.

Tuning in to a station

1Press POWER to turn on the radio.

2Press BAND to select the band AM or FM.

3Press PRESET.

The preset number appears in upper left in the display.

4Turn TUNE/SELECT clockwise or counterclockwise to select the preset number.

5Adjust the volume using VOLUME.

AField strength level indicator B Preset number*

C Band

D Frequency E Current time

*When you tune in a station by selecting a preset number.

When an analog FM broadcast that supports RBDS (Radio Broadcast Data System) is received

x

x

x

D Current station’s call letters
E Band
F Station name and information
G Title/Artist name
H Sub channel (FM only)

Appears when HD Radio broadcasts multiple

program.

Turn TUNE/SELECT clockwise or

counterclockwise to select a sub channel.

I Frequency
J Current time
K Text information

*When you tune in a station by selecting a preset number

Note

The display item differs depending on the content of a broadcast or the station.

To change the display settings (BRIGHTNESS/ CONTRAST)

1Press MENU to show the menu display.

2Turn TUNE/SELECT clockwise or counterclockwise to select “BRIGHTNESS” or “CONTRAST,” then press ENTER.

3Turn TUNE/SELECT clockwise or counterclockwise to select the setting or to adjust the level, then press ENTER.

BRIGHTNESS:

The brightness of the display is selected from “HIGH,” “MIDDLE” or “LOW.”

CONTRAST:

The contrast of the display can be adjusted by 11 levels.

Note

If you do not set the menu within 10 seconds, the setting mode is canceled.

Tip

You can adjust “BRIGHTNESS” directly by pressing BRIGHT on the remote commander.

If you select “RADIO AM,” “RADIO FM” or

“LINE IN” continue the following steps.

6 Turn TUNE/SELECT clockwise or

counterclockwise to select the preset number,

then press ENTER.

If you selected “LINE IN” in step 5, this step is not

necessary.

7 Turn TUNE/SELECT clockwise or
counterclockwise to set the volume, then

press ENTER.

To set the alarm

1Press MENU to show the menu display.

2Turn TUNE/SELECT clockwise or counterclockwise to select “ALARM SET,” then press ENTER.

3Turn TUNE/SELECT counterclockwise to select “ON,” then press ENTER.

“ALARM” appears in the display.

Example of display when unit is off

If you press DISPLAY while the display above appears, the display changes to the following.

To return to the previous display, press DISPLAY again.

AALARM indicator B Alarm setting time
C Alarm setting (Source, Frequency, etc.) D Current time

Listening to the external equipment

1Connect the LINE IN jack of the unit to the line out jack or headphone jack of the external equipment using the audio connecting cable (supplied).

ANTENNA

AMRESET

FM

IN

Audio connecting cable (supplied)

To external equipment

2Press POWER to turn on the radio.3Press RADIO/LINE IN to select “LINE IN” in the display.4Play the equipment connected to the LINE IN jack.

5Adjust the volume using VOLUME.

Specifications

Time display

12-hour system

Frequency range

FM : 87.5 – 108 MHz

AM : 530 – 1,710 kHz

Speaker

Approx. 6.6 cm (2 5/8 inches) dia. 4 Ω

Output

i(headphone) jack (ø 3.5 mm stereo minijack)

Input

LINE IN jack (ø 3.5 mm stereo minijack)

Antenna terminal

75 Ω antenna terminal for FM Antenna terminal for AM

Power output

2.8 W + 2.8 W (at 10 % harmonic distortion)

Power requirements

120 V AC, 60 Hz

Dimensions

Approx. 300 ⋅ 120 ⋅ 169 mm (w/h/d)

(11 7/8 ⋅ 4 3/4 ⋅ 6 3/4 inches) not incl. projecting parts and controls

Mass

Approx. 3.6 kg (7 lb 15.8 oz) incl. power supply unit

Supplied accessories

Remote commander (1) FM wire antenna (1) FM dipole antenna (1) AM loop antenna (1) Audio connecting cable (1)

Design and specifications are subject to change without notice.