Receiving the stored stations
1 Press (SOURCE) repeatedly to select the radio.
2 Press (MODE) repeatedly to select the band.
3 Press the number button ((1) to (6)) on which the desired station is stored.
If preset tuning does not work
— Automatic tuning/Local Seek Mode
Automatic tuning:
Press (SEEK) (+) or (SEEK) (–) to search for the station.
Scanning stops when the unit receives a station. Repeat the operation until the desired station is received.
Local Seek Mode:
If the automatic tuning stops too frequently, press (SENS) repeatedly until “LCL” indicator appears in the display.
“LCL” indicator is displayed.
Only the stations with relatively strong signals will be tuned in.
To cancel the local seek mode, press (SENS) again.
Tip
If you know the frequency of the station you want to listen to, press and hold (SEEK) (+) or (SEEK)
If FM stereo reception is poor
—Monaural Mode
During radio reception, press (SENS) repeatedly until “MONO” indicator appears in the display.
“MONO” indicator is displayed.
The sound improves, but becomes monaural (“ST” disappears).
To return to normal redio reception mode, press (SENS) again.
Tip
If FM broodcasts are difficult to hear, set DSO to OFF (page 14).
Storing only the desired stations
You can manually preset the desired stations on any chosen number button.
1 Press (SOURCE) repeatedly to select the radio.
2 Press (MODE) repeatedly to select the band.
3 Press (SEEK) (+) or (SEEK) (–) to tune in the station that you want to store.
4 Press the desired number button ((1) to (6)) for 2 seconds until “MEM” appears.
The number button indication appears in the display.
Note
If you try to store another station on the same number button, the previously stored station will be erased.
11