Remote control

Battery installation

Use 2 “AAA” size batteries (UM/SUM-4, R3, HP-16 or similar). Batteries are not included.

Plastic film covering can be removed or peeled off.

1Open the battery cover.

2Insert the batteries according to the direction indicated in the battery

compartment.

When inserting or removing the batteries, push them toward the battery terminals.

3Close the battery cover.

Caution:

Replace all old batteries with new ones at the same time. Do not mix old and new batteries.

Do not mix old and new batteries.

Remove the batteries if the unit will not be used for a long period of time. This will prevent potential damage due to battery leakage.

Do not use rechargeable batteries (nickel-cadmium battery, etc.).

Installing the batteries incorrectly may cause the unit to malfunction.

Batteries (battery pack or batteries installed) shall not be exposed to excessive heat such as sunshine, fire or the like.

Notes concerning use:

Replace the batteries if the operating distance is reduced or if the operation becomes erratic. Purchase 2 “AAA” size batteries (UM/SUM-4, R3, HP-16 or similar).

Periodically clean the transmitter on the remote control and the sensor on the unit with a soft cloth.

Exposing the sensor on the unit to strong light may interfere with operation. Change the lighting or the direction of the unit.

Keep the remote control away from moisture, heat, shock, and vibrations.

General control

To turn the power on

The first time the unit is plugged in, the unit will enter the demonstration mode.

Function

Main unit

Remote

Operation

control

 

 

 

Volume control

Turn the volume knob toward VOL +/- (on main unit) or press VOLUME +/- (on remote control) to increase or decrease the volume.

Auto power on function

When you press any of the following buttons, the unit turns on.

iPod® / iPhone, CD, USB, AUDIO / LINE (INPUT), TUNER (BAND) on the remote control: Selected function is activated.

button on the main unit: The unit turns on and playback of the last function will start (CD, TUNER, USB, iPod, AUDIO IN, LINE IN)

Auto power off function

The main unit will enter the stand-by mode (when iPod/iPhone is not docked) after 15 minutes of inactivity during:

iPod/iPhone: No connection.

AUDIO IN / LINE IN: No detection of input signal or very low sound audibility.

TUNER: No reception of broadcast signal.

CD / USB: In the stop mode.

Note:

However, if iPod/iPhone is docked, the unit will begin charging. “Charge Mode” will be displayed.

Muting

The volume is muted temporarily when pressing the MUTE button on the remote control. Press again to restore the volume.

X-Bass control

When the power is first turned on, the unit will enter the extra bass mode which emphasizes the bass frequencies, and “X-BASS” will appear. To cancel the extra bass mode, press the X-BASS button on the remote control.

Bass control

1Press the BASS/TREBLE button to select “BASS”.

2Within 5 seconds, press the VOLUME (+ or -) button to adjust the bass.

Treble control

1Press the BASS/TREBLE button to select “TREBLE”.

2Within 5 seconds, press the VOLUME (+ or -) button to adjust the treble.

Equalizer

Power on/ off

Press to turn the

 

power on or to go to

 

stand-by mode.

Demo on/ off

____

Press to enter to

 

demonstration on or

 

off mode.

Display brightness control

When the EQUALIZER MODE button is pressed, the current mode setting will be displayed. To change to a different mode, press the EQUALIZER MODE button repeatedly until the desired sound mode appears.

Flat

Equalizer off.

Game

For game.

Classic

For classical music.

Pops

For pop music.

Vocal

Vocals are enhanced.

Jazz

For jazz.

To dim the display brightness, press the DEMO/DIMMER button on the remote control.

Dimmer 1 (Display is dim).

Dimmer 2 (Display gets dimmer).

Dimmer off (Display is bright).

Volume illuminator

When the power is turned on, volume illuminator lights up.

To turn on/off the light, hold down the DEMO/DIMMER button on the remote control for more than 2 seconds.

Volume auto fade-in

If you turn off and on the main unit with the volume set to 27 or higher, the volume starts at 16 and fades in to the last set level.

Function

When the FUNCTION button on main unit is pressed, the current function will change to different mode. Press the FUNCTION button repeatedly to select desired function.

CD

FM STEREO

FM MONO

AM

Line In Audio In iPod USB

Note:

The backup function will protect the memorized function mode for a few hours should there be a power failure or the AC power cord becomes disconnected.

E-5

Page 6
Image 6
Sony XL-HF200P(BK) operation manual Remote control, General control

XL-HF200P(BK) specifications

The Sony XL-HF200P(BK) is a high-performance audio device that caters to audiophiles and casual listeners alike, combining sleek design with cutting-edge technology. This compact CD player and Hi-Res audio player is known for its versatile functionality and ability to deliver an outstanding sound experience.

One of the standout features of the XL-HF200P(BK) is its ability to play various audio formats, including CD, MP3, WMA, and high-resolution audio files. This flexibility ensures that users can enjoy their favorite music from multiple sources without compromise. The device supports high-resolution audio up to 96kHz/24-bit, allowing listeners to experience studio-quality sound with rich detail and clarity.

Equipped with Sony’s own DSEE (Digital Sound Enhancement Engine), the XL-HF200P(BK) enhances lower-quality audio files, restoring the nuances often lost in compression. This technology effectively elevates the listening experience by adding depth and warmth to music, making it suitable for a wide range of genres.

The XL-HF200P(BK) also features a large internal storage capability, allowing users to store a significant number of tracks without the need for external devices. Additionally, it comes with USB connectivity, enabling direct transfers of music files from a computer, and even allows for playback from USB drives. The intuitive interface makes navigating through libraries seamless, ensuring users can quickly find and play their desired tracks.

Another notable characteristic of the XL-HF200P(BK) is its compact size, making it easy to integrate into any space, whether it be a home entertainment setup or a personal audio system. Its minimalist design not only adds a modern aesthetic but also prioritizes functionality.

Wireless connectivity further enhances the user experience with Bluetooth support, allowing for easy streaming from smartphones, tablets, and other Bluetooth-enabled devices. This feature provides convenience and adds versatility, freeing users from the constraints of wired connections.

Finally, the robust build quality of the Sony XL-HF200P(BK) ensures longevity and durability, making it a reliable addition to any audio setup. With its combination of high-fidelity sound, diverse format support, and user-friendly features, the Sony XL-HF200P(BK) stands out as a remarkable option for those seeking an immersive audio experience. Whether for casual listening or critical playback, this device promises to meet and exceed expectations.