2003 SONY MOBILE
PRODUCT GUIDE
• 1600W max power
• 500W x 1 RMS into 4W, 20Hz - 300Hz @ 0.2% THD
• 900W x 1 RMS into 2W, 20Hz - 300Hz @ 0.6% THD
• Class D
• Variable 50 - 300Hz 12dB/oct Low Pass Filter
• 40Hz EQ Boost
• RCA & Speaker Level Inputs
XM-D1000P5
Monaural Power Amplifier
Audio Power Specifications
POWER OUTPUT AND TOTAL HARMONIC DISTORTION
500 watts minimum continuous average power into 4 ohms, 20 Hz to 300 Hz with no more than 0.2% total harmonic distortion per Car Audio Ad Hoc Committee standards.
Other Specifications
Circuit system | Class D Technology |
| Pulse power supply |
Inputs | RCA pin jacks |
| High level input connector |
Outputs | Speaker terminals |
| Through out pin jacks |
Suitable speaker impedance | 2 – 8W |
Maximum outputs | 1,000 W (at 4W) |
| 1,600 W (at 2W) |
Rated outputs (supply voltage at 14.4 V) |
|
| 500 W (20 – 300 Hz, 0.2% THD, at 4W) |
| 900 W (20 – 300 Hz, 0.6% THD, at 2W) |
Frequency response | 5 – 300 Hz ( +0.5 dB, |
Harmonic distortion | 0.06% or less (at 100 Hz, 4W) |
Input level adjustment range | 0.3 – 6.0 V (RCA pin jacks) |
| 1.2 – 12.0 V (High level input) |
50 – 300 Hz, | |
Low boost | 0 – 10 dB (40 Hz) |
Power requirements | 12 V DC car battery (negative ground) |
Power supply voltage | 10.5 - 16 V |
Current drain | at rated output : 90 A (2W) |
| Remote input : 2 mA |
Dimensions | Approx. 347 × 57 × 339 mm (w/h/d) |
| (13 3/4 × 2 1/4 × 13 3/8 in.) (w/h/d) not incl. |
| projecting parts and controls |
Mass | Approx. 3.8 kg (8 lb. 6 oz.) not incl. accessories |
Supplied accessories | Mounting screws (5) |
| High level input cord (1) |
| Protection cap (1) |
Design and Specifications subject to change without notice.