Other Functions
Adjusting the Sound
Characteristics
1 Select the item you want to adjust by pressing the SEL button repeatedly.
BAS (bass) nTRE (treble) nBAL (balance) nFAD (fader) nVOL (volume)
nBAS (bass)
| 2 Adjust the selected item by pressing | ||
| either the | or | button. |
| Adjust within three seconds after selecting. | ||
EN | (After three seconds the buttons will again | ||
serves as the volume control buttons.) | |||
Enjoying Bass and Treble at Low Volume
— Loudness Function
SENS
Press the 
button for more than two seconds. nLOUD “LOUD” will appear on the display.
The bass and treble are boosted. To cancel, press again.
Maintenance
Fuse Replacement
When replacing the fuse, be sure to use one matching the amperage rating stated on the fuse. If the fuse blows, check the power connection and replace the fuse. If the fuse blows again after replacement, there may be an internal malfunction. In such a case, consult your nearest Sony dealer.
Fuse (10 A)
Warning
Never use a fuse with an amperage rating exceeding the one supplied with the unit as this could damage the unit.
Cleaning the Connectors
The unit may not function properly if the connectors between the unit and the front panel are not clean. In order to prevent this, open the front panel by pressing the RELEASE button, then detach it and clean the connectors with a cotton swab dipped in alcohol. Do not apply too much force. Otherwise, the connectors may be damaged.
Main unit
Back of the front panel
8
Actual total number | Sony |
