Locating the beginning of the tracks — Automatic Music Sensor (AMS)
You can skip up to nine tracks at one time.
During playback, press either side of (SEEK/AMS) momentarily.
|
|
| SEEK |
|
|
|
|
| |
|
|
| AMS |
|
To locate the |
| To locate the | ||
previous tracks |
| succeeding the tracks | ||
Note
The AMS function may not work when :
•the blanks between tracks are shorter than 4 seconds
•there are noises
•there are long sections of low volume or quiet sections.
Changing the displayed items
Each time you press (DSPL) momentarily during tape playback, the displayed item changes as follows:
z Tape playback z Clock z Frequency*
EN
*While the ATA function is activated.
Playing the tape in various modes
Searching the desired track
—Intro scan
Press (1) during playback.
“INTRO” appears on the display.
The first 10 seconds of all the tracks are played.
When you find the desired track, press again. The unit returns to the normal playback mode.
Playing tracks repeatedly
—Repeat play
Press (2) during playback.
“REP” appears on the display.
When the currently played track is over, it will be played again from the beginning.
To cancel this mode, press again.
6
Switching to the radio during fast- winding the tape
—Automatic Tuner Activation (ATA)
Press (5) during playback.
“ATA” appears on the display.
When
Skipping blanks during tape playback — Blank skip
Press (6) during playback.
“BL.SKIP” appears on the display.
Blanks longer than eight seconds will be automatically skipped during tape playback.
Actual total number: | Sony |
|
|
