Locating a disc by name

—List-up (When connecting a CD unit with the CD TEXT/CUSTOM FILE function, or an MD unit)

You can use this function for discs that have been assigned custom names*1 or for CD TEXT discs*2.

*1 Locating a disc by its custom name: when you assign a name for a CD (page 20) or an MD.

*2 Locating discs by the CD TEXT information: when you play a CD TEXT disc on a CD unit with the CD TEXT function.

1 During playback, press (LIST).

The name assigned to the current disc appears in the display.

2 Press (LIST) repeatedly until you find the desired disc.

3 Press (SEEK) (+) or (SEEK) (–) to play the disc.

Notes

•Once a disc name has been displayed for 5 seconds, the display goes back to its normal playback mode.

•If there are no discs in the magazine, “NO DISC” appears in the display.

•If a disc has not been assigned a custom file, “NO NAME” appears in the display.

•The information appears only in upper case. There are also some letters which cannot be displayed.

Additional Information

Maintenance

Fuse replacement

When replacing the fuse, be sure to use one matching the amperage rating stated on the original fuse. If the fuse blows, check the power connection and replace the fuse. If the fuse blows again after replacement, there may be an internal malfunction. In such a case, consult your nearest Sony dealer.

Fuse (10 A)

Warning

Never use a fuse with an amperage rating exceeding the one supplied with the unit as this could damage the unit.

Cleaning the connectors

The unit may not function properly if the connectors between the unit and the front panel are not clean. In order to prevent this, detach the front panel (page 7) and clean the connectors with a cotton swab dipped in alcohol. Do not apply too much force. Otherwise, the connectors may be damaged.

Main unit

Back of the front panel

continue to next page t

21