Changing the sound and display settings
The following items can be set:
•REAR/SUB*1 — to switch the audio output REAR or SUB.
–Select “REAR” to output to a power amplifier.
–Select “SUB” to output to a subwoofer.
•A.SCRL (Auto Scroll)*2 (page 18).
•M.DSPL (Motion Display) — to turn the motion display on or off.
–Select “ON” to activate the motion display (the moving pattern appears in the display).
–Select “OFF” to deactivate the motion display.
•DEMO*1 — to turn the demonstration display on or off.
–Select “ON” to activate the demonstration display (The demonstration starts about 10 seconds after the unit is turned off).
–Select “OFF” to deactivate the demonstration display.
•BEEP*3 — to turn the beeps on or off.
•DIM — to change the brightness of the display.
–Select “ON” to dim the display.
–Select “OFF” to deactivate the Dimmer.
Switching the REAR/SUB*1
Press the select button and then rotate the volume control dial.
After 3 seconds, the display returns to normal play mode.
Selecting the desired item
Press the select button and the desired button simultaneously.
select button + (3): A.SCRL*2
select button + (4): M.DSPL
select button + (4): DEMO*1
select button + (6): BEEP*3
select button + (DSPL): DIM
After the mode setting is complete, the display returns to normal play mode.
To cancel the item, press the select button and the desired button simultaneously again.
*1 When the unit is turned off.
*2 When an optional CD/MD unit is connected and played.
*3 The beep sound is output only when the
15