![](/images/new-backgrounds/1262882/262882145x1.webp)
Touch a specific area on the camera screen to set the area of focus. Continuous autofocus is off. Touch and hold the camera screen until the yellow focus frame turns blue, indicating that the focus is set. The photo is taken when you release your finger.
Object tracking
When you select an object by touching it in the viewfinder, the camera tracks it for you.
This setting is only available in Manual capturing mode.
HDR
Use the HDR (High Dynamic Range) setting to take a photo against strong backlight or in conditions where the contrast is sharp. HDR compensates for the loss of detail and produces a picture that is representative of both dark and bright areas.
This setting is only available in Manual capturing mode.
ISO
You can reduce image blurring caused by dark conditions or moving subjects by increasing the ISO sensitivity.
Auto
Sets the ISO sensitivity automatically.
50
Sets the ISO sensitivity to 50.
100
Sets the ISO sensitivity to 100.
200
Sets the ISO sensitivity to 200.
400
Sets the ISO sensitivity to 400.
800
Sets the ISO sensitivity to 800.
This setting is only available in Manual capturing mode.
Metering
This function automatically determines a
Center
Measures the center of the image, and determines the exposure based on the brightness of the subject there.
Spot
Adjusts the exposure in a very small part of the image that you want to capture.
Face
Measures the amount of light on the face, and adjusts the exposure so that the face is neither too dark or too bright.
Multi
Divides the image into multiple regions, and measures each region to determine a
This setting is only available in Manual capturing mode.
Image stabilizer
When taking a photo, it can be difficult to hold the device steady. The stabilizer helps you by compensating for small movements of the hand.
This setting is only available in Manual capturing mode.
73
This is an Internet version of this publication. © Print only for private use.