Specifications

AUDIO POWER SPECIFICATIONS

POWER OUTPUT AND TOTAL HARMONIC DISTORTION

With 3.2-ohm loads, both channels driven from 150 - 10,000 Hz; rated 1.8 W per channel- minimum RMS power, with no more than 10 % total harmonic distortion in AC operation.

Other SpecificationsCD player section

System

Compact disc digital audio system Laser diode properties

Material: GaAlAs

Wave length: 780 nm

Emission duration: Continuous

Laser output: Less than 44.6 µW

(This output is the value measured at a distance of about 200 mm from the objective lens surface on the optical pick-up block with 7 mm aperture.)

Spindle speed

200 r/min (rpm) to 500 r/min (rpm) (CLV) Number of channels

2 Frequency response

20 - 20 000 Hz +1/–2 dB Wow and flutter

Below measurable limit

Radio section

Frequency range

FM: 87.5 - 108 MHz

AM: 530 - 1 710 kHz

Antennas

FM: Telescopic antenna

AM: Built-in ferrite bar antenna

General

Speaker

Full range: 10 cm (4 in.) dia.,

3.2Ω , cone type (2)

Outputs

Headphones jack (stereo minijack) For 16 - 68 Ω impedance headphones

Power output

2.3W + 2.3 W (at 3.2 Ω , 10 % harmonic distortion)

Power requirements

DC IN 9V jack accepts:

Supplied AC power adaptor for use with 120 V AC, 60 Hz

9 V DC, 6 size D (R20) batteries

Battery life

For CD playback:

Sony R20P: approx. 7.5 h

Sony alkaline LR20: approx. 14 h Dimensions

Approx. 430 ⋅ 172 ⋅ 287.5 mm (w/h/d)

(17 ⋅ 6 7⁄8 ⋅ 11 3⁄8 inches) (incl. projecting parts)

Mass

Approx. 4.6 kg (7 lb. 11 oz) (incl. batteries) Supplied accessories

AC power adaptor (1)

Design and specifications are subject to change without notice.

Optional accessories

Sony MDR headphones series

24