Preparing the power sources (continued)
Notes
•Use only the supplied car battery cord (DCC- EC12). Do not use any other car battery cord.
Polarity of the plug
•Use the supplied car battery cord only with a negative # grounded car that uses a 12 V battery.
•If the inside of the cigarette lighter socket is dirty with ashes, etc., the plug of the car battery cord may become heated due to a bad contact. Before connecting the cord, be sure to clean the socket.
•When listening to the radio on this player, the car battery cord may cause noise. Extend it as long as possible, and keep it as far away as possible from the player.
4Using the player on car battery
Insert one end of the supplied car battery cord (DCC- EC12) to the DC IN 10.6 – 12 V socket located on the side of the player, and the other end to a cigarette lighter socket.
to a cigarette lighter socket
DC IN 10.6 – 12 V
To replace the fuse of the car battery cord
Be sure to use the fuse with the correct amperage. (4 A, 125 V, length 31.75 mm)
Remove
Fuse
Plug end Tighten | Cigarette lighter plug |
24Setting Up