Specifications

AUDIO POWER SPECIFICATIONS

POWER OUTPUT AND TOTAL HARMONIC DISTORTION

With 3.2-ohm loads, both channels driven from 100 - 10,000 Hz; rated 1.7 W per channel- minimum RMS power, with no more than 10 % total harmonic distortion in AC operation.

Other Specifications

CD player section

System

Compact disc digital audio system Laser diode properties

Material: GaAlAs

Wave length: 780 nm

Emission duration: Continuous

Laser output: Less than 44.6 µW

(This output is the value measured at a distance of about 200 mm from the objective lens surface on the optical pick-up block with 7 mm aperture.)

Spindle speed

400 r/min (rpm) to 1 000 r/min (rpm) (CLV) Number of channels

2 Frequency response

20 - 20 000 Hz +0/–1 dB Wow and flutter

Below measurable limit

Radio section

Frequency range

FM: 87.5 - 108 MHz

AM: 530 - 1 710 kHz

Antennas

FM: Telescopic antenna

AM: Built-in ferrite bar antenna

General

Speaker

Full range: 8 cm (3 1⁄4 in.) dia.,

3.2Ω , cone type (2)

Output

Headphones jack (stereo minijack): For 16 - 64 Ω impedance headphones

Power output

2.3W + 2.3 W (at 3.2 Ω , 10 % harmonic distortion)

Power requirements For player:

120 V AC, 60 Hz

9 V DC, 6 size C (R14) batteries For remote control:

3 V DC, 2 size AAA (R03) batteries Power consumption

16 W Battery life

For player:

CD playback

Sony R14P: approx. 1.5 h

Sony alkaline LR14: approx. 8 h

Radio reception

Sony R14P: approx. 6 h

Sony alkaline LR14: approx. 20 h

Dimensions

Approx. 455 ⋅ 214 ⋅ 180 mm (w/h/d)

(18 ⋅ 8 1⁄2 ⋅ 7 1⁄8 inches) (incl. projecting parts)

Mass

Approx. 3.5 kg (7 lb. 11 oz) (incl. batteries) Supplied accessories

AC power cord (1) Remote control (1) CD-ROM (SonicStage) (1)

SonicStage Installation/Operating Guide (1)

US and foreign patents licensed from Dolby Laboratories.

Design and specifications are subject to change without notice.

Optional accessories

Sony MDR headphones series

30