![](/images/backgrounds/221916/221916-12367x1.png)
To set up a static IP address
1From the Home screen, tap .
2Find and tap Settings > Wireless & networks >
3Press .
4Tap Advanced .
5Mark the Use static IP checkbox.
6Tap and enter the information needed for your
•IP address
•Gateway
•Netmask
•DNS 1
•DNS 2
7Press and tap Save
.
Connected devices
Share media files in your phone with other devices over a shared
To use the Connected devices function
1Connect your phone to a
2From your Home screen, tap , then find and tap Connected devices.
3Tap beside Change server name and edit your phone name if needed. This name will later appear on other client device(s) connected to the
4Mark the Share contents checkbox. appears in the status bar. Your phone can now work as a media server.
5Connect your computer or other client devices to the same
6Activate client software installed on your computer. Find and select your phone as the server.
7A notification appears in the status bar of the phone. Tap it and set access permissions.
8Transfer to and show your phone content on client devices. It may take a couple of minutes to show all the content on the client devices if many photo or music files are saved on the phone.
9To close the Connected devices view, press . The Connected devices function stays running in the background.
10To disconnect from the server, go to the Connected devices view in the phone and unmark the Share contents checkbox.
A client device for which you have already set access permissions is a registered client device and is displayed in the Registered devices list. A client device that is waiting for you to grant access permissions is displayed in the Pending devices list.
The instructions described above may differ depending on the client devices. Also refer to your client device User guide. If the device cannot connect, check that your home network is working.
To set access permissions for a pending client device
1From your Home screen, tap , then find and tap Connected devices.
2Select a client device from the Pending devices list.
3Select an access permission level.
To change the name of a registered client device
1From your Home screen, tap , then find and tap Connected devices.
2Select a client device from the Registered devices list, then select Change name.
3Enter a new name for the client device.
67
This is an Internet version of this publication. © Print only for private use.