62GB
7Select the desired function on the
S-AIR receiver.
xWhen “PARTY” is set
The S-AIR receiver’s function changes
sequentially as you press FUNCTION of
the main unit (page34) or S-AIR CH of the
S-AIR receiver.
xWhen “SEPARATE” is set
The S-AIR receiver’s function changes
by pressing S-AIR CH of the S-AIR
receiver as follows.
“MAIN UNIT” t “TUNER FM” t
“DMPORT” t “AUDIO” t …
To enjoy the same function as the unit,
select “MAIN UNIT.”
8Adjust the volume on the S-AIR
receiver.
Note
•When the sound is other t han 2 channel stereo, multi-
channel sound is downmixed to 2 channel.
•The sound of the S-AIR receiver may be cut off by
operation of the unit.
To control the system from the
S-AIR receiver
You can control the system from the S-AIR
receiver by using the following buttons.
For details, refer to the operating instructions of
the S-AIR receiver.
You can enjoy the S-AIR receiver while the unit
is in standby mode by setting “S-AIR STBY” to
“STBY ON.”
1Press SYSTEM MENU.
2Press X/x repeatedly until “S-AIR
MENU” appears in the front panel
display, then press or c.
3Press X/x repeatedly until “S-AIR
STBY” appears in the front panel
display, then press or c.
Note
•When the wireless transmitte r is not inserted in
the unit, “S-AIR STBY” cannot be selected.
4Press X/x to select the desired setting.
• “STBY ON”: You can enjoy the S-AIR
receiver while the unit is in standby mode
or turned on. The power consumption
during standby mode increases.
•“STBY OFF”
: You cannot enjoy the
S-AIR receiver while the unit is in
standby mode.
5Press .
The setting is made.
6Press SYSTEM MENU.
The system menu turns off.
Note
•When you turn the syste m off while “S-AIR STBY”
is set to “STBY ON,” “S-AIR” flashes (when sound
transmission between the unit and S-AIR receiver is
not established), or lights up (when sound
transmission between the unit and S-AIR receiver is
established) in the front panel display.
Press Operation
N, X, x,
./>
Share the same operations on the
remote and unit.
S-AIR CH Change the function of the system.
Enjoying the S-AIR receiver
while the unit is in standby
mode
For the S-AIR receiver