External Audio Device
63GB
It is easy to set the same ID for the unit and an
S-AIR sub unit, such as a surround amplifier or
S-AIR receiver, to establish sound transmission.
However, neighbors may also receive your
system’s sound if IDs are the same, or you may
receive sound from neighbors. To prevent this,
you can identify the unit with a speci fic S-AIR
sub unit by performing the pairing operation.
xBefore pairing
Sound transmission is established by the ID
(example).
xAfter pairing
Sound transmission is established between the
paired unit and S-AIR sub unit(s) only.
To perform pairing
1Place the S-AIR sub unit that you want
to pair near the unit.
Note
•Remove headphones from the surround
amplifier (if connected).
2Match the IDs of the unit and the S-AIR
sub unit.
• To set the ID of the unit , see “To set the ID
of the unit” (page60).
• To set the ID of the S-AIR sub unit, re fer
to the operating instructions of the S-AIR
sub unit.
3Press SYSTEM MENU.
4Press X/x repeatedly until “S-AIR
MENU” appears in the front panel
display, then press or c.
5Press X/x repeatedly until “PAIRING”
appears in the front panel display, then
press or c.
Note
•When the wireless transmitter is not inserted in
the unit, “PAIRING” cannot be selected.
Identifying the unit with a
specific S-AIR sub unit
(Pairing operation)
For the surround amplifier
For the S-AIR receiver
This unit
ID A
ID A
S-AIR sub unit
ID A
S-AIR sub unit
Your room Neighbor
This unit
ID A
S-AIR sub unit
ID A ID A
S-AIR sub unit
Your room Neighbor
Pairing
No transmission