Sony Ericsson Bluetooth Enabled Hands-Free Kit /Headset manual USING WITH SONY ERICSSON P800

Continuous pressing of the digital volume control can rapidly set the volume. If the volume is too high, it can cause feedback (whistling sound), echo or background noise during calls on some cell phones.

f.ACTIVATING THE VOICE DIALING

Use your phone when recording for the voice dialing. Before voice dialing, you must first turn on the name dialing function and record your voice. To turn voice dialing on and record number types:

1.Press the Menu Key. Scroll to Settings, YES. Voice control, YES.

2.Voice settings, YES. Voice dialing, YES. Select On, YES.

3.Continue pressing NO to exit

QUICK ACCESS:

Press Menu followed by the sequence of numbers below.

T39m

Settings	Voice control
4	9

Voice settings

1

Voice dialing

1

On

1

g.RECORDING FOR VOICE DIALING

1.Press the Menu Key. Scroll to Settings, YES. Voice control, YES. Voice Commands, YES. Select Contacts, YES. Add voice, YES.

2.Find a contact name and follow the instructions in the display. An icon will appear next to a contact name which has a voice command.

3.Continue pressing NO to exit.

QUICK ACCESS:

Press Menu followed by the sequence of numbers below.

T39m

Settings

4

Voice control

9

Voice commands

2

Contacts

4

Note: Noisy environment may affect voice recognition. Record your voice in a quiet environment.

USING WITH SONY ERICSSON P800

a.ACTIVATING THE BLUETOOTH

You must activate your Bluetooth to establish a Bluetooth connection between your mobile phone and other Bluetooth devices.

1.On the Applications window (flip open mode), scroll and tap Contol Panel using the stylus. Go to Connections. Tap Bluetooth. Go to Settings. On the Operation mode, tap On.

2.Tap to exit and return to the Applications window.

b. PAIRING TO THE CELLULAR PHONE

1.Bring the cellular phone at about 20 cm from the headset.

2.Detach the headset from the holster/base.

3.Turn off the headset.

4.From the OFF state, press the multi-function button for 10 seconds or until a distinctive three- tone sound will be heard and at the same time the red and blue indicator will alternately blink. Press the multi-function button once (headset mode). This indicates that the unit is now ready for pairing.

5.On the Applications window (flip open mode), scroll and tap Control Panel.. Go to Connections. Tap Bluetooth. Bluetooth devices is displayed as sub-title. Tap Add. The phone is now searching for pairable devices.

6.Tap the device you want to pair with. Bonding in progress will be displayed on screen. The

	phone will then ask for the pass key.
7.	Tap	on the lower left corner of the screen. Enter “0000” as the passkey and tap Done.
	Tap Done under the sub-title, “Secure Connection.” If the pairing is successful, the alternating
	red/blue lights will stop.
8.	Tap	to exit and return to the Applications mode. If the pairing is unsuccessful, the steps
	above may be repeated.

The unit is now ready to link calls from the phone directly to the headset. An icon will appear during the standby mode indicating that the headset is linked with the phone.

c.ANSWERING/RECEIVING A CALL

When the phone is receiving a call, a ring tone will be heard on the headset.

1.Just press the multi-function button down once to answer the call. Pressing the button again will hang-up and terminate the call.

2.If you wish to answer a call on the cellular phone, just press YES and the call is automatically

transferred to the phone. Pressing the multi-function button transfers the call on the headset. To terminate the call, press the multi-function button again.

9