To activate voice answering and record voice answer commands

1From standby select Menu > Settings

>the General tab > Voice control

>Voice answer > Activate.

2Follow the instructions that appear and select Cont. Wait for the tone and say “Answer”, or another word.

3Select Yes to accept or No for a new recording.

4Follow the instructions that appear and select Cont. Wait for the tone and say “Busy”, or another word.

5Select Yes to accept or No for a new recording.

6Follow the instructions that appear and select Cont.

7Select where your voice answering is to be activated.

To answer a call using voice commands

•Say “Answer”.

To reject a call using voice commands

•Say “Busy”.

Diverting calls

You can divert calls, for example, to an answering service.

When Restrict calls is used, some divert call options are not available. See Restricted dialling on page 31.

To divert calls

1From standby select Menu > Settings > the Calls tab > Divert calls.

2Select a call type and a divert option.

3 Select Activate.

4 Enter the number to divert calls to and select OK.

More than one call

You can handle more than one call at a time. For example, you can put an ongoing call on hold, while you make or answer a second call. You can also switch between the two calls. You cannot answer a third call without ending one of the first two calls.

Call waiting

When call waiting is used, you hear continuous beep if you receive

a second call.

Calling 29

This is the Internet version of the User's guide. © Print only for private use.