To record a voice command using voice dialling

1From standby select Menu > Settings > the General tab > Voice control > Voice dialling > Activate.

2Select Yes > New voice command and select a contact. If the contact has more than one number, select the number to add the voice command to.

3Record a voice command such as “John mobile”.

4Follow the instructions that appear. Wait for the tone and say the command to record. The voice command is played back to you.

5If the recording sounds OK, select Yes. If not, select No and repeat steps

3 and 4.

Voice commands are saved in the phone memory only. They cannot be used in another phone.

Voice dialling

You can hear your recorded contact name when you receive a call from that contact.

To voice dial1From standby press and hold down a volume key.

2Wait for the tone and say a recorded name, for example “John mobile”. The name is played back to you and the call is connected.

Voice answering

When you use a handsfree, you can answer or reject incoming calls with your voice.

To activate voice answering and record voice answer commands

1From standby select Menu > Settings > the General tab > Voice control > Voice answer > Activate.

2Follow the instructions that appear and select Cont. Wait for the tone and say “Answer”, or another word.

3Select Yes to accept or No for a new recording.

4Follow the instructions that appear and select Cont. Wait for the tone and say “Busy”, or another word.

5Select Yes to accept or No for a new recording.6Follow the instructions that appear and select Cont.7Select where your voice answering is to be activated.To answer a call using voice commandsSay “Answer”.To reject a call using voice commandsSay “Busy”.
30Calling

This is the Internet version of the User's guide. © Print only for private use.