![](/images/backgrounds/263753/263753-22x1.png)
|
|
|
|
| CLOCK |
|
|
|
|
| MODE |
| |
|
|
| AUTO |
| TIMER | |
|
|
| OFF |
| SET |
|
|
|
|
|
| ON/OFF | |
MIN | MAX | 1 | 2 | 3 | 4 | 5 |
|
| |||||
| VOLUME |
|
|
|
| TUNE/TIME SET |
|
| PRESET TUNING/PRESET TIMER | TIMER SET | |||
|
|
|
| SELECT/ | PRESET |
|
RADIO OFF
ON
BAND
CD
FM wire antenna
RADIO | AUTO OFF | SHUFFLE |
TIMER | CD REP1 ALL | |
WEATHER |
| PRESET |
| TRACK | |
AM |
| MHz |
FM12PM |
| kHz |
F
g
Buckle
G
WEATHER/FMAM
FM wire antenna
| 3 Press CLOCK. | |
Setting the Clock | ||
The beep sounds and the minute starts to | ||
| flash. Repeat step 2 to set the minute. After | |
The display will flash “AM12:00” when the | setting the minute, press CLOCK again. The | |
batteries are installed or the AC power adaptor | two beeps sound and the clock starts from | |
is plugged in for the first time. | 0 seconds. |
1Release the buckle on the back of the unit to open the CD compartment lid and place a disc.
2Close the CD compartment lid and fasten with the buckle until it clicks.3Press CD u.“” and “TRACK 01” appear in the display to indicate that track 1 of CD is playing.
CD ALL
TRACK
AM
To | Operation |
Pause | CD u |
Resume play after pause | CD u again |
Locate the beginning of | .** |
the current track (AMS*) |
|
Locate the next track | >** |
(AMS*) |
|
Go back at high speed | Hold .** |
Go forward at high speed | Hold >** |
Locate the previous track | . repeatedly** |
(AMS*) |
|
Locate the succeeding | > repeatedly** |
track (AMS*) |
|
Stop play | OFF x |
*AMS = Automatic Music Sensor
**These operations are possible during both play and pause.
Various Modes of CD Playback
You can play tracks repeatedly or in random order.
Press MODE.
Each pressing MODE changes the play mode as follows:
Display |
|
|
|
indication | Play mode |
|
|
none | (normal play) | < |
|
All the tracks are played once. |
| ||
| m |
|
|
“REP 1” | (single repeat) |
|
|
A single track is played repeatedly. |
|
| |
| m |
|
|
“REP ALL” | (all repeat) |
|
|
All the tracks are played repeatedly. |
|
| |
| m |
|
|
“SHUFFLE” | (shuffle play) |
|
|
All the tracks are played once in random order. m
“SHUFFLE REP” (shuffle repeat)
All the tracks are played repeatedly in random order.
Notes
•Discs with
•If you press CD u when there is no disc in the CD compartment, “00” flashes for about
5 seconds on the display and the unit turns off automatically.
About CD-Rs/CD-RWs
This unit is compatible with
Music discs encoded with copyright protection technologies
This product is designed to play back discs that conform to the Compact Disc (CD) standard. Recently, various music discs encoded with copyright protection technologies are marketed by some record companies. Please be aware that among those discs, there are some that do not conform to the CD standard and may not be playable by this product.
To handle compact discsCorrect
Handle the disc by its edge.
Area | Channel step |
North and South America | 10 kHz |
Other countries/regions | 9 kHz |
2While holding down OFF x, keep pressing the PRESET TUNING / PRESET TIMER button 1 for more than 5 seconds.
Two short beeps will sound, and the AM channel step will be changed. If you proceed to step 2, the channel step will change again.
Notes
•When the AM channel step is changed, the preset stations will be initialized.
•When the AM channel step is changed, the preset stations will be reset to their default factory settings.
•When the AM channel step is changed, the FM channel step also will be changed.
Improving the Reception (See fig.
G)
WEATHER, FM:Tie the FM wire antenna to the supplied suction cup.
Extend and adjust the antenna Secure the suction cup on the wall where you get optimum reception .
AM: Rotate the unit horizontally for optimum reception. A ferrite bar antenna is built in the unit.
Playing the Radio —Manual Tuning
1Press RADIO ON BAND to turn on the radio.The band and frequency will appear in the display for a few seconds. Then the current time indication will return to the display.
2Press RADIO ON BAND repeatedly to select the desired band.AM FM1 FM2
WEATHER
When using FM1 or FM2 preset mode, you may listen to the radio on either mode (See “Presetting Your Favorite Station”).
3Rotate in either +/– direction the TUNE/ TIME SET/TIMER SET dial to tune in to the desired station.
Two short beeps sound when the minimum frequency of each band is received during tuning.
4Adjust the volume using VOLUME.
To check the station being receivedPress RADIO ON BAND or rotate in either +/– direction the TUNE/TIME SET/TIMER SET dial lightly. The display shows the band and frequency for a few seconds and then returns to the current time.
To turn off the radio, press OFF x.
Presetting Your
Favorite Station
—Preset Tuning
You can preset 10 stations in FM (5 stations in FM1, 5 stations in FM2) and 5 stations in each
AM, WEATHER.
Presetting a Station
Example: To set FM 90.0 MHz to PRESET TUNING/PRESET TIMER button 2.1Press RADIO ON BAND to turn on the radio.
2Tune in to FM 90.0 MHz (See “Manual Tuning”).3Hold down the desired PRESET TUNING/PRESET TIMER button (in this case, 2) until you hear two short beeps.
4Adjust the volume using VOLUME.
After a few seconds, the display returns to the current time but the PRESET TUNING button number remains.
Note
To change the preset station, preset a new station to the button of your choice. The previous station will be overwritten by the new one.
Switching between monaural and stereo
1Press RADIO ON BAND to turn on the radio.
2Press RADIO ON BAND repeatedly to select FM 1 or FM 2.3Press MODE.“Mono (monaural)” or “ST (Stereo)” appears in the display.
Each time you press MODE, the mode changes either “Mono” or “ST.”
4Select Mono or ST.The mode you selected appears in the display for a few seconds and returns to the current time.
Note
When listening to the FM stereo reception, normally set to “ST” (stereo). If the FM stereo reception is poor, set to “Mono”.
Although the sound will not be heard in stereo, noise will be reduced.
Using the Countdown Timer
The beep alarm will go off when the countdown time has elapsed. Use the timer as a reminder. The buzzer alarm activates whether or not the radio reception/CD playback mode is on.
The countdown time can be set at 1 minute intervals between 1 to 120 minutes.
1Press TIMER SET ON/OFF.
The indication flashes in the display.
TIMERALL
2Rotate in either +/– direction the TUNE/ TIME SET/TIMER SET dial to set the desired time.
3Press TIMER SET ON/OFF.
Two short beeps sound and countdown starts. When the countdown has completed, the beep alarm will go off and the display will flash.
Notes
•To stop the beep alarm, press TIMER SET ON/ OFF. The alarm will beep 30 minutes if it is not turned off.
•While the timer is counting down, the display shows the remaining time. To display the current time, press CLOCK. To check the station you are listening to, Press RADIO ON BAND shortly. The band and frequency will appear for a few seconds.
•To cancel the timer during the countdown, press TIMER SET ON/OFF.
The countdown timer will be canceled and the current time will appear in the display.
Using the PRESET TIMER buttons
You can use the countdown timer with the PRESET TUNING/PRESET TIMER buttons.1Press TIMER SET ON/OFF.
2Press the desired PRESET TUNING/ PRESET TIMER button.The countdown time and the preset button number will appear in the display.
The default countdown time for the PRESET TIMER buttons 1 to 5 are 3 minutes,
10 minutes, 30 minutes, 60 minutes and
90 minutes respectively.
3Press TIMER SET ON/OFF again.
A beep sound and starts to countdown. When the countdown time has elapsed, the beep alarm will go off and the display will flash.
Presetting a Countdown Time
You can also store a countdown time of your choice to each of the five preset buttons.
1Set the timer (See steps 1 and 2 of “Using the Countdown Timer”).2Hold down the desired PRESET TUNING/PRESET TIMER button until you hear two short beeps.
The countdown time has been stored as displayed.
Other Useful
Functions
AUTO OFF function
The AUTO OFF function will turn off the radio/ CD after a preset duration of time.
1Press RADIO ON BAND/CDu to turn on the radio/CD.2Press AUTO OFF.
Each time you press AUTO OFF, the AUTO OFF time (minutes) changes as follows.
OFF 120 90 60 30
The radio/CD will play for the AUTO OFF time you have set, then turn off.
The AUTO OFF time appears in the display for a few seconds with AUTO OFF indication.
Note
To turn off the radio/CD before the AUTO OFF time has elapsed, press OFF x.
The beep sounds and the hour flashes in the display.
2Rotate in either +/– direction the TUNE/ TIME SET/TIMER SET dial until the correct hour appears in the display.
ALL
Each rotation of the dial changes the digit(s) by one.
When you hold the dial, the digit(s) change rapidly.
ALL
AM
Notes
•You can set the clock also during the radio reception/CD playback mode.
•To set the current time quickly, rotate and hold in either +/– direction the TUNE/TIME SET/ TIMER SET dial.
•To set the current time exactly, follow step 2 and press CLOCK again with the time signal of a radio station.
Playing a CD (See Fig. F)
An 8 cm
Incorrect
Do not touch the surface.
Do not stick paper or tape nor write anything on the surface.
Changing AM
Channel Step
The AM channel step differs depending on area. The channel step of this unit is
10 kHz to match the frequency allocation system of the country/region listed below. When needed, change the channel step before listening to the radio.
RADIO | ALL |
| PRESET |
FM 2 | MHz |
|