1Slide the cover open and lift it off.

2Insert the SIM card. Make sure the SIM card is placed under the silvery holders.

3Place the battery in the phone with the label side up and

the connectors facing each other.

4Place the cover on the phone and slide it into place.

5 Connect the charger to the phone at the flash symbol. The flash symbol on the charger plug must face upwards.

6 It may take 30 minutes for the battery icon to appear.

7 Wait approximately 4 hours or until the battery icon indicates that the battery is fully charged. For an indication

of charging, press to activate the screen.

8 Remove the charger by tilting the plug upwards.

Some functions use more battery power than others and may cause a need for more frequent re-charging. However talk-time or standby time may become noticeably shorter due to wear and you may have to replace your battery. Only use approved batteries from Sony Ericsson % 71 Battery use and care.

PIN (Personal Identification Number)

You may need a PIN (Personal Identification Number) from your network operator to activate the services in your phone. Each PIN digit appears as *, unless it starts with emergency number digits, for example 112. This is so that you can see and call an emergency number without entering a PIN

%16 Emergency calls. Press to correct mistakes.

If you enter the wrong PIN three times in a row, the SIM card is blocked and the message PIN blocked appears. To unblock it, you need to enter your PUK (Personal Unblocking Key) % 61 SIM card lock.

7

This is the Internet version of the user’s guide © Print only for private use.