The external antenna connector is an MMCX pattern.
The PC300 is a 3.3 volt PC card and has mechanical keying to prevent insertion in older 5 volt only PCMCIA slots. Laptops 'Designed for Windows 98' and onwards have 3.3 volt support.
The amount of power that your PC300 draws from the laptop battery depends on several factors, including status, frequency band, and distance to the base station that is used.
The PC300 can be turned off under software control from the Wireless Manager application or the signal strength icon in the status tray. It is recommended that the user remove the card from the laptop when flying to prevent any accidental transmission.
Protective Case
When it is not in use, you should store your PC300 in the protective case. You can affix a lanyard to the case if required, so that you can carry your PC300 around your neck. The protective case can also accomodate the accessory antenna.
You may attach a lanyard here
Insert your PC300 from this end
Accessory Antenna
To attach the accessory antenna
1.Open the antenna connector door in the plastic extension part of your PC300.
2.Plug the accessory antenna in to the antenna connector.
Overview3