To start a recording using a voice command
1.From standby, press and hold a volume key for one second.
2.Lift the phone to your ear, wait for the tone and say “Record”. The voice command is played back to you and a tone indicates that the recording has begun.
3.To end the recording, press Stop.
To listen to recording using a voice command
1.From standby, press and hold a volume key for one second.
2.Lift the phone to your ear, wait for the tone and say “Play”. The voice command is played back to you.
3.Listen to your recordings. Press Stop to stop.
Editing your voice commands
You can keep all your voice commands up to date by
To
1.Scroll to Settings, Voice Control, Voice Profiles, Edit Commands.
2.Select a voice command.
3.Select Replace Voice.
To listen to a recorded voice command, select Play Voice.
36 Calling
4.Lift the phone to your ear, wait for the tone and say the command.
You can also edit the voice command for a contact name in Phonebook, Manage Contact, Edit Contact.
Tips when recording and using voice
commands
If your phone cannot detect speech, one of the following might have happened:
•You spoke too softly – try speaking louder.
•You held the phone too far away – hold it as you do during a call.
•The voice command was too short – it should be around one second long and more than one syllable.
•You spoke too late or too soon – speak immediately after the tone.
•You did not record the voice command when the handsfree was attached – for voice control with a handsfree kit, record when the handsfree is attached.
•You used another intonation – use the same intonation as you did when recording the voice command.
This is the Internet version of the user's guide. © Print only for private use.